on 18-04-2020 17:56
How can you clear an IP address that the UPnP has automatically assigned as a port forwarding ipaddress
I would like to set this IP address manually to port forward
I have unplug the device, turned UPnP to disabled , and then rebooted the Router
But they automatically assigned UPnP is still there
Answered! Go to Answer
on 18-04-2020 17:59
on 18-04-2020 22:18
Todays esoteric answer to your question...
If its already IN your port forwrding by Upnp, why are you trying to add it manually? Or get rid of it?
Or to translate, what are you trying to achieve?
on 18-04-2020 17:59
on 18-04-2020 19:12
How do you delete
Automatically added by UPnP
in the port forwarding list?
18-04-2020 19:14 - edited 18-04-2020 19:16
Disabled UPnP in settings and then rebooted the Router.....but this one Lan IP address is still in the port forwarding list
I have even turned the IP camera device OFF
and then rebooted the Router but it’s still there in the port forwarding list
on 18-04-2020 22:18
Todays esoteric answer to your question...
If its already IN your port forwrding by Upnp, why are you trying to add it manually? Or get rid of it?
Or to translate, what are you trying to achieve?
19-04-2020 12:38 - edited 19-04-2020 12:39
I want UPnP disabled
I want only to add manually port forwarding addresses
I don’t want any automatically added
It will not let me add it manually because it is already there added automatically
on 19-04-2020 17:23
Okay so..
Set a DIFFERENT static IP. Switch OFF device.Switch device back on.
Has the rule cleared?
Yes- your sorted- add the rule and switch the device back to your preferred IP.
No?
Reboot HUB-
Repeat above steps.
Or just switch off UPNP? Either on the device or HUB.
on 19-04-2020 19:07