Am I going mad or?

[risc19]

Just got a hub5, thought I would try router mode although I'm sure I'll come to my senses at some point.

I was just looking at network status and I cant find specific data about the 3.1 channels.

I just came from the hub4 where I could see the modulation and power levels of the downstream and upstream channels.

On the hub5 I cant.

Am i going nuts or what?

Here is the data......

Cable Modem StatusItem Status Comments

Acquired Downstream Channel(Hz)	435000000	Locked
Ranged Upstream Channel(Hz)	49600000	Ranged
Provisioning State	Online	Operational

Downstream bonded channels

Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID

1	435000000	9.5	41	QAM 256	4
2	411000000	9.4	40	QAM 256	1
3	419000000	9.5	40	QAM 256	2
4	427000000	9.7	41	QAM 256	3
5	443000000	9.7	41	QAM 256	5
6	451000000	9.6	41	QAM 256	6
7	459000000	9.5	41	QAM 256	7
8	467000000	9.3	41	QAM 256	8
9	475000000	9.4	41	QAM 256	9
10	483000000	9.5	41	QAM 256	10
11	491000000	9.5	41	QAM 256	11
12	499000000	9.5	41	QAM 256	12
13	507000000	9.1	41	QAM 256	13
14	515000000	9	41	QAM 256	14
15	523000000	8.9	41	QAM 256	15
16	531000000	9.1	41	QAM 256	16
17	539000000	9.1	41	QAM 256	17
18	547000000	9.1	41	QAM 256	18
19	555000000	9.1	41	QAM 256	19
20	563000000	8.9	41	QAM 256	20
21	571000000	8.9	40	QAM 256	21
22	579000000	8.9	41	QAM 256	22
23	587000000	9	41	QAM 256	23
24	595000000	9.1	41	QAM 256	24
25	603000000	8.8	40	QAM 256	25
26	611000000	8.2	40	QAM 256	26
27	619000000	8.2	40	QAM 256	27
28	627000000	8.2	40	QAM 256	28
29	635000000	8.2	40	QAM 256	29
30	643000000	8	40	QAM 256	30
31	651000000	7.9	39	QAM 256	31

Downstream bonded channels

Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors

1	Locked	41	35	0
2	Locked	40	20	0
3	Locked	40	22	0
4	Locked	41	30	0
5	Locked	41	26	0
6	Locked	41	33	0
7	Locked	41	59	0
8	Locked	41	75	0
9	Locked	41	92	0
10	Locked	41	79	0
11	Locked	41	102	0
12	Locked	41	115	0
13	Locked	41	174	0
14	Locked	41	225	0
15	Locked	41	305	0
16	Locked	41	285	0
17	Locked	41	369	0
18	Locked	41	409	0
19	Locked	41	522	0
20	Locked	41	560	0
21	Locked	40	716	0
22	Locked	41	619	0
23	Locked	41	666	0
24	Locked	41	817	0
25	Locked	40	974	0
26	Locked	40	1370	0
27	Locked	40	1526	0
28	Locked	40	1687	0
29	Locked	40	1580	0
30	Locked	40	1517	0
31	Locked	39	1816	0

[jem101]

Also in risc's post 2, the network configuration table clearly shows the modem operating in DOCSIS 3.1 mode (albeit that the formatting has gone slightly awry)!

I tend to agree with the others, it's more likely to simply be a firmware bug feature where it is omitting to show the 3.1 channel stats.

John

[CapricornDog]

Its all in the logs.

1-11-2022 19:30:25

notice

DS profile assignment change. DS Chan ID: 32; Previous Profile: ; New Profile: 1 2 3.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;

See the last bit VER=3.1 so dowload is 3.1

And same with upload

11-11-2022 19:30:41

notice

US profile assignment change. US Chan ID: 6; Previous Profile: 13; New Profile: 11 13.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;

.