on 16-06-2019 11:29
Hi I am having issues with the 5ghz network on my Super Hub 3.
I am renamed my networks so I know which is 2g and 5g, however recently the 5g network will constantly drop internet connectivity. The 2g network stays connected to the internet but will sometimes see drops from the internet.
We have also been having an issue with our Hub since we got it where whenever the hub loses power for whatever reason it factory resets and I have to go back in and change the network SSID's and passwords, every single time. Not sure these are related but still very annoying.
Anyone know anyway to solve these issues?
Thanks in advance!
on 16-06-2019 11:59
Try turning off the Intelligent / Smart WiFi feature in the hub's menus and see if that makes any difference.
on 17-06-2019 09:20
Thanks for the suggestion but I've already had this option disabled. Strange that it has worked fine for over a year until all of a sudden now keeps dropping connection, that and the constant resetting of the router settings is making me think the hub is faulty
on 17-06-2019 09:42
Could be the Hub at fault, but repeated resets can also be a symptom of a cable connection problem or power connection problems. A guess on my part, its most likely an issue with the VM cable network, and that's something they'll need to fix. In my view there's no point using the offshore "technical support" because they are useless, particularly if there's any opportunity to blame wifi, so hold on until the VM staff pick this message up.
In the meanwhile, if not already tried check the following - that the Hub 3 power supply is properly connected, all power leads fully pushed home, and if possible try a different wall socket. Also check that the cable between the hub and wall is properly connected at either end and any nuts are fully done up (hand tight), that the cable itself isn't kinked, creased or damaged, and any VM cable on the outside of the building is similarly intact.
Just to explain the point about kinked and damaged cable - if somebody has inadvertently bent the cable too tightly, hit it with something heavy, or abrasively damaged the cable eg with a vacuum or on outside walls a strimmer, the cable can deform, that causes signal interference, and the very high frequencies that cable connections use can be badly affected. I doubt this applies, but it is one of the few things you can check yourself.
on 17-06-2019 09:58
Hello catrinaduffy2
Thanks for your post on our Community
Sorry to hear about the connectivity issues that you are having
I have had a quick check on your Hub and can see the upstream power levels are way out.
This would need an engineer visit
I will need to pass security through a private message though
If you check the purple envelope top right of your screen that would be fantastic
Gareth_L
17-06-2019 12:44 - edited 17-06-2019 12:45
Thank you Andruser
Gareth, I have replied to your private message. Thank you for getting in touch so quickly!
on 17-06-2019 14:53
Thanks for getting back to me catrinaduffy2
The answers were spot on
Now we just need to find a time that suits you best for an engineer to come out
Gareth_L
on 28-03-2020 11:03
oh my god, please help me, too!
I'm having this exact problem. I started with this issue in June, then in Nov my service went out, it only got fixed yesterday (it took 5 months for one cable replacement) and now my 2.5ghz and 5ghz networks aren't working and in less than a day of having my hub back its rebooted and reset 4 times!!! I'm at my wits end with this service. Genuinely don't know what to do.
For now I've disabled the 5ghz option and it seems to be stable enough to write this message. Managed to do this by etherent - no wireless connection would allow to go to admin. in fact, no wireless options would connect to the hub at all.
Any help at all would be so appreciated, like I said, im at my actual wits end.
on 28-03-2020 11:12
on 28-03-2020 11:39
Factory reset the hub