Virgin Media Community

[br0wnbunny]

Upstream bonded channels

Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID

1	32600000	43.5	5120	64 qam	3
2	25800000	42.3	5120	64 qam	4
3	39400000	43.5	5120	64 qam	2
4	46200000	43.5	5120	64 qam	1

Upstream bonded channels

Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts

1	ATDMA	0	0	22	0
2	ATDMA	0	0	2	0
3	ATDMA	0	0	4	0
4	ATDMA	0	0	4	0

[Adduxi]

You have a lot of T3 timeouts, which is not good, but your stats are okay.   

Try a full factory reset of  the Hub as below.  You will need to split the SSID again after this.

Remove any ethernet cables from the Hub and hold the pinhole reset switch for 60 seconds. Do NOT reboot the Hub, just let it do it's thing. Note you will need the passwords from the bottom of the Hub afterwards, so make sure they are legible.

Other than this, I'm out of ideas.  VM will need to check why the T3's are occurring.

[Alex_RM]

Hi br0wnbunny,

Thanks for posting and sorry to hear you've had some issues with your connection.

I've had a look at things from our side, and can see it's been some time since your hub was last rebooted. 

Can you follow the advice from Adduxi and let us know if this offers any improvement?

Alex_Rm

[br0wnbunny]

Reset the router the other day, and to be honest, we've tried a full factory reset before and it didn't improve anything.  Getting really annoyed tbh with this, ridiculous that we can't play at the same time without the lag on the ps5.  

[br0wnbunny]

Just an update, will be setting up a mesh system this weekend and hoping this fixes it.  Will report back Monday!