• 1
  • 0
  • 0
Just joined
Message 1 of 2
Flag for a moderator

S102 code -

Received replacement TV V6 box this morning (S102) code on installation 

No replacement remote - cannot press Ok to reboot as old remote Is not connected 

anyway around this opposed to waiting for someone to answer from the help line please ?

0 Kudos
  • 6.48K
  • 1.01K
  • 1.6K
Very Insightful Person
Very Insightful Person
Message 2 of 2
Flag for a moderator

Re: S102 code -

Hi KeithLouise,

Error code S102 means that you need to call 0800 953 9500 to activate the box.

You will need the box serial number, and your account number and area code.

As to pairing the existing remote, you might be better trying with new batteries.

I hope this helps

Press the Channel minus button on the front of your V6 box for 10 seconds
The Power light will go Off and On. After the light comes back on the V6, it will be ready to pair with the remote control
Pairing Mode remains active on the V6 for 5 minutes allowing you to try the remote instructions again if unsuccessful on the first attempt.

Getting the Remote into Pairing Mode
Hold the Info button down on the remote for 7 seconds until the light on the top of the remote goes green
Press any key on the remote and if pairing is successful you will see the light flash GREEN Twice
To confirm if pairing was successful Press and hold the channel plus button on the front of your V6 until you hear a bleeping sound coming from the remote control


The Service you do for others is the rent you pay for your room here on Earth - Muhammad Ali

I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more

Have I helped? Click to mark as a Helpful Answer or use Kudos to say thanks

0 Kudos