If the above fails you could also try the long winded method.
Make sure you have new batteries in the remote, and a basketful full of food and drink.
This time make sure the AV device and your TiVo box are switched on
Press and hold down Clear and Volume Down at the same time until the light on top of the remote flashes green twice Enter the code 1999 to access the AV device code database – the LED will flash green twice
Point the remote at the AV device and press channel up repeatedly until a code mutes the volume for the device – the LED will flash green each time a code is sent. When the volume turns off, press Mute to turn the volume back on
Press Volume Up / Down and Mute to check that the remote is working with your device. If it doesn’t work, continue to search using Channel Up until the next code turns off the volume, and repeat the above steps
When the Volume and Mute keys work, press OK to store the code. The LED will then flash green twice.If you reach the end of the code database, the light on top of the remote will give an extended red flash and exit programming mode.
The Service you do for others is the rent you pay for your room here on Earth - Muhammad Ali
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Problem Solved?Click to mark as a Helpful Answer or use Kudos to say thanks