Can I just use the power supply from my Super Hub 2 in my Hub 3? They have the same spec 12V 2.5A so that shouldn't be an issue but wanted to check. If I can, it would save me having to empty and remove a fitted unit.
Go to Answer
Worked fine for me. Low voltage DC power units are commodity items, so if specs match go ahead (and in my experience also worked OK with a similar spec Casio keyboard PSU).
For future reference, it might be worth considering that PSUs don't last for ever, and building them in is a bad idea.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
Found this answer helpful? Share it!
Thanks. It's not too difficult to get to the PSU, just a bit of a bother to empty it first then pull away from the wall. Might look at cutting a hole in for quicker access.
Basically you can use any good quality power supply as long as you follow these rules;
Must be the correct voltage
Must supply the same or greater amps.
Must not supply lower amps.