Menu
Reply
  • 1
  • 0
  • 0
Joining in
117 Views
Message 1 of 2
Flag for a moderator

upload speeds stuck

please read 

i have recently upgraded from M100 to M500 whilst my download speeds have been pretty good a few dips but nothing major i have had one annoying issue for the past 3 to 4 days my router keepa going down and all lights turn green after its come back on the upload speed is fully locked at 24 on wireless and LAN port and wont got above that but when i factory reset the router by holding the reset button after it goes back to normal 36mbps upload and i have to keep doing this multiple times a day now and its starting to getting annoying having to keep reseting the router after i just upgraded is there a fix for this?

0 Kudos
Reply
  • 12.28K
  • 950
  • 1.58K
Alessandro Volta
90 Views
Message 2 of 2
Flag for a moderator

Re: upload speeds stuck

Have you checked the 'Check Service Status' at the top of the page ?

If nothing is showing try phoning 0800 561 0061, this will tell you of more local issues that may be affecting your district. Be aware that it isn't a manned line.

Go round all the accessible internal and external co-ax connections and ensure that they are finger tight.

If everything above is OK we need do some more troubleshooting; to start with …

Disable any VPNs that you have running.

Can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you should post the link straight away.

Post a 'Live Link' to your BQM on here.

Instructions for posting BQM Link

Under your BQM graph are two links in red.

Click the lower link (Share Live Graph) then click generate.

Copy the text in the Direct Link box, beware, there may be more text than you can see.

On here click the Link icon (2 links chain to the left of the camera icon)

In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.

Then

 

Can you please

Type 192.168.0.1 (192.168.100.1 in Modem mode) into your browser URL bar and press enter. 

Hub 2 & 3 When the page appears DO NOT LOG IN but click ‘Check Router Status’.

Hub 4 When the page appears LOG IN then click ‘Check Router Status’.

Copy and paste the contents of the Downstream, Upstream, Configuration and Network Log tabs onto here, if you get a yellow / straw box warning click the Post button again. Use one post for each tab if you wish. Please do not use screen grabs.

A Guru will be along soon to decipher the info.

***********************************************************************************************************************************

Mike Robinson
Semi-Retired Aircraft Engineer & Computer Based Training and Learning Designer for many of the world's Military Arms.

My Broadband Ping - Mike Robbo
0 Kudos
Reply