on 28-06-2023 11:45
Hi all,
The above is cat 6 ethernet into the PC.
The below is over WIFI to the PC.
Can anyone help with what I can try to get closer to router speed with ethernet?
TIA.
Ian
Answered! Go to Answer
on 28-06-2023 11:56
Hi ian2726
Try using a different ethernet cable, the one you are using may be faulty and thus limiting speeds to less than 100, although in all likelihood it's your computers NIC settings. Depending on your network card it should be set to either1 Gbps or 2.5Gps Full Duplex. Yours is probably set to 100 Mbps.
.
on 28-06-2023 11:56
Hi ian2726
Try using a different ethernet cable, the one you are using may be faulty and thus limiting speeds to less than 100, although in all likelihood it's your computers NIC settings. Depending on your network card it should be set to either1 Gbps or 2.5Gps Full Duplex. Yours is probably set to 100 Mbps.
.
on 28-06-2023 12:11
Hi Dave,
Thank you for this it was the NIC settings.
I never would've found that myself.
Cheers
Ian
on 28-06-2023 12:29
Thanks for updating the thread Ian.
Happy surfing 😃