Menu
Reply
paulprescott32
  • 17
  • 0
  • 1
Tuning in
163 Views
Message 1 of 5
Flag for a moderator

hub 3 setting

after a reset from vrigin an telling me its all ok yet im on 2 upstreams which lady on phone telliing me is right.my download speed changes on all 4 ethernet ports an speeds from 35 on port 4 port one 240 

 

Cable Modem  

Acquired Downstream Channel (Hz)
331000000
Locked
Ranged Upstream Channel (Hz)
53700000
Locked

downstream bonded channels

13310000008.540256 qam25
2267000000740256 qam17
32750000007.340256 qam18
42830000007.540256 qam19
52910000007.340256 qam20
62990000006.540256 qam21
73070000006.540256 qam22
83150000006.840256 qam23
93230000007.640256 qam24
10339000000940256 qam26
113470000009.540256 qam27
123550000009.540256 qam28
133630000009.440256 qam29
143710000009.540256 qam30
153790000009.540256 qam31
16387000000940256 qam32
173950000008.840256 qam33
18403000000940256 qam34
194110000009.340256 qam35
20419000000940256 qam36
214270000009.140256 qam37
224350000009.140256 qam38
23443000000940256 qam39
24451000000940256 qam40



Downstream bonded channels

Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors

1Locked40.950
2Locked40.360
3Locked40.350
4Locked40.350
5Locked40.330
6Locked40.3120
7Locked40.940
8Locked40.310
9Locked40.950
10Locked40.350
11Locked40.350
12Locked40.3190
13Locked40.3150
14Locked40.960
15Locked40.360
16Locked40.350
17Locked40.900
18Locked40.960
19Locked40.360
20Locked40.900
21Locked40.900
22Locked40.940
23Locked40.350
24Locked40.350

 

Upstream bonded channels

15370000042.3512064 qam5
23940000041.8512064 qam8



Upstream bonded channels

Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts

1ATDMA0010
2ATDMA0000
0 Kudos
Reply
-tony-
  • 16K
  • 1.26K
  • 3.77K
Very Insightful Person
Very Insightful Person
155 Views
Message 2 of 5
Flag for a moderator

Re: hub 3 setting

lets forget the lady on the phone - i dont think any areas now have 2 upstreams but not 100% sure

do a full reset and see if things change - hold the button a good 30 sec

____________________

Tony
0 Kudos
Reply
paulprescott32
  • 17
  • 0
  • 1
Tuning in
145 Views
Message 3 of 5
Flag for a moderator

Re: hub 3 setting

Done all this that's the info after a hard reset. a engineer was booked yet didn't show made some poor excuse.. I been told there should b 4 upstreams an my downstream r all over the place in number terms

0 Kudos
Reply
-tony-
  • 16K
  • 1.26K
  • 3.77K
Very Insightful Person
Very Insightful Person
141 Views
Message 4 of 5
Flag for a moderator

Re: hub 3 setting

as i said 4 upstreams are the norm but it depends on the area or did - the people here will confirm

your downstream levels are fine - bit near the top but in limit - dont know on different ports giving different speeds

is that on the same pc just swapping the lan cable from one port to the next - if so try another cable - it could be that

____________________

Tony
0 Kudos
Reply
paulprescott32
  • 17
  • 0
  • 1
Tuning in
137 Views
Message 5 of 5
Flag for a moderator

Re: hub 3 setting

I was hitting over 300 then from weekend it's been dog. Port one on my gaming pc fine but moving down speeds r getting slower. Yea hopefully someone can confirm bout the upstreams as I always thought meant b 4 

0 Kudos
Reply