Menu
Reply
ah_93
  • 3
  • 0
  • 1
Tuning in
536 Views
Message 1 of 4
Flag for a moderator

gig1 slow speeds

Hi,

so i recently upgraded from M350 to gig1 and have been experiencing quite slow speeds.

i am currently directly connected to the hub 4 and getting the below speeds:

speed.PNG

My usual setup is an amplifi mesh however have tried direct CAT6 connection to rule out the mesh

Below are my power levels from the hub 4:

3.0 Downstream channels

Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID

253310000002.29999940.366287QAM25625
11390000003.70000140.946209QAM2561
21470000003.59999840.366287QAM2562
31550000003.40000240.366287QAM2563
41630000003.50000040.946209QAM2564
51710000003.29999940.366287QAM2565
61790000003.29999940.366287QAM2566
71870000003.40000240.366287QAM2567
81950000003.29999940.366287QAM2568
92030000003.00000040.366287QAM2569
102110000002.79999940.366287QAM25610
112190000002.59999840.366287QAM25611
122270000002.50000040.366287QAM25612
132350000002.40000240.366287QAM25613
142430000002.09999840.366287QAM25614
152510000002.09999840.366287QAM25615
162590000002.00000040.366287QAM25616
172670000002.29999940.366287QAM25617
182750000002.79999940.366287QAM25618
192830000002.79999940.366287QAM25619
202910000002.59999840.366287QAM25620
212990000002.40000240.366287QAM25621
223070000002.29999940.366287QAM25622
233150000002.40000240.366287QAM25623
243230000002.40000240.366287QAM25624
263390000002.70000140.366287QAM25626
273470000002.90000240.946209QAM25627
283550000002.90000240.366287QAM25628
293630000003.09999840.946209QAM25629
303710000003.40000240.366287QAM25630
313790000003.29999940.366287QAM25631



3.0 Downstream channels

Channel Lock Status RxMER (dB) Pre RS Errors Post RS Errors

25Locked40.36628700
1Locked40.94620900
2Locked40.36628700
3Locked40.36628700
4Locked40.94620900
5Locked40.36628700
6Locked40.36628700
7Locked40.36628700
8Locked40.36628700
9Locked40.36628700
10Locked40.36628770
11Locked40.36628700
12Locked40.36628700
13Locked40.36628700
14Locked40.36628700
15Locked40.36628700
16Locked40.36628700
17Locked40.36628700
18Locked40.36628700
19Locked40.36628700
20Locked40.36628700
21Locked40.36628700
22Locked40.36628700
23Locked40.36628700
24Locked40.36628700
26Locked40.36628700
27Locked40.94620900
28Locked40.36628700
29Locked40.94620900
30Locked40.36628700
31Locked40.36628700
 
0 Kudos
Reply
ah_93
  • 3
  • 0
  • 1
Tuning in
535 Views
Message 2 of 4
Flag for a moderator

Re: gig1 slow speeds



3.1 Downstream channelsChannel Channel Width (MHz) FFT Type Number of Active Subcarriers Modulation (Active Profile) First Active Subcarrier (Hz)
159964K1880QAM4096759


3.1 Downstream channelsChannel ID Lock Status RxMER Data (dB) PLC Power (dBmV) Correcteds (Active Profile) Uncorrectables (Active Profile)
159Locked41-1.2839767630

 

3.0 Upstream channelsChannel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
13260000047.0205995120 KSym/sec64QAM5
22580000046.2705995120 KSym/sec64QAM6
33940000047.2705995120 KSym/sec64QAM4
44620000047.2705995120 KSym/sec64QAM3


3.0 Upstream channelsChannel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
1US_TYPE_STDMA0000
2US_TYPE_STDMA0000
3US_TYPE_STDMA0000
4US_TYPE_STDMA0000
0 Kudos
Reply
conman33158
  • 1.67K
  • 134
  • 364
Super solver
456 Views
Message 3 of 4
Flag for a moderator

Re: gig1 slow speeds

Your stats look fine. Are you testing wireless or wired connection?

What speed do you get on https://samknows.com/realspeed/ with direct wired connection from PC/Laptop to router using a Cat 5e cable or better with a 1Gbps capable Ethernet network card?

  1. Make sure the cable is Cat 5e or better
  2. Make sure your PC/laptop has a 1Gbps or better network card
  3. Disconnect all other Ethernet cables when running the test
  4. Make sure Hub 4 is in router mode and not modem mode
***********************************************************************************************************************************
BT Full Fibre 900 FTTP - Asus RT-AX82U to Openreach ONT Box & Asus RT-AX56U with AiMesh setup
***********************************************************************************************************************************
0 Kudos
Reply
ah_93
  • 3
  • 0
  • 1
Tuning in
387 Views
Message 4 of 4
Flag for a moderator

Re: gig1 slow speeds

Hi,

Thanks for the reply, i have upgraded to a Unifi Dream Machine and since the upgrade i have seen a big difference.

Thanks again for casting an eye over the stats

test.PNG