22-08-2023 07:42 - edited 22-08-2023 07:42
Hi.
I’m a gig1 customer. My upload speed is struggling to get above 10mbps when checking via Sam knows real speed. Is there anything I can do to fix it? The download speed seems to be working fine
on 22-08-2023 12:25
I’ve just noticed the same thing with my connection in area 26. We have M500, usually get 35Mbps up, yesterday and today 3Mbps. I called VM, went through the troubleshooting steps, none of which helped and have an engineer coming out tomorrow.
on 22-08-2023 13:43
@cbut wrote:Hi.
I’m a gig1 customer. My upload speed is struggling to get above 10mbps when checking via Sam knows real speed. Is there anything I can do to fix it? The download speed seems to be working fine
Lets see the whole data set - thus...
-------
In your browser’s URL box type in http://192.168.0.1 (or http://192.168.100.1 - if in modem mode) (DONT click these links) - and hit return. No need to log in - just click on the “Router Status” icon/text at bottom-middle (Hub3/4/5) or top/right (SH’s) - of the Login page.
Then… Navigate to these “data pages” and just copy/paste the normal “Formatted Text” (not images) 3 FULL sets of data onto here – 2 tables from the Downstream, 2 from the Upstream, & the Network Logs pages. Don't worry too much about the formatting it can be easily read & DON’T include personal data or MAC addresses - blank them out - if you copy/paste the data, the board software will do this for you (you may need to click the "submit" button again). If character limits are “exceeded” - just do two posts
Also, If you haven’t already, set up a free, secure and “offlsite” - “Broadband Quality Monitor” to continually monitor the state of your connection and record any true network dropouts , latency issues, packet drops, etc - it will thus allow you to differentiate between those and simple wifi dropouts. It does it 24/7/365 and it keeps a visual record of any/all of your network disconnections, useful data to have to match to the Network logs (in your Hub settings) and also in discussions with VM - note it will take a few hours to start seeing a sensible picture - post up the “link” to the “share live graph”. Click the lower link (Share Live Graph) then, click generate. Copy the text in the Direct Link box, beware, there may be more text than you can see. On here click the Link icon (2 links chain to the left of the camera icon) In the URL box paste the link you copied and then click OK
https://www.thinkbroadband.com/broadband/monitoring/quality
on 22-08-2023 15:20
Hi John thanks for coming back. I have an engineer booked. Seemingly there’s a fault on the line