Upload is 4mb instead of the usual 35mb plus. I stream so i need a good stable upload speed but it keeps dropping out which is effecting my apeed on twitch via xbox.
It was fine yesterday but today all day its jist not stable which means i cant stream. Xbox server and system connectiona are stable and live. I checked virgin in my area and it says there are no issues. So why is my upload so low and unstable when streaming and not streaming?
I have checked all connections and cables are secure and even done re sets on both systems and cleared and disconnected anything using the lines but still having an instable upload speed. Please help.
Its beating me down. Any help would be appreciated.
Have you checked the 'Check Service Status' at the top of the page ?
If nothing is showing try phoning 0800 561 0061, this will tell you of more local issues that may be affecting the area. Be aware that it isn't a manned line.
Go round all the accessible internal and external co-ax connections and ensure that they are finger tight.
If everything above is OK we need do some more troubleshooting; to start with …
Can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you should post the link straight away.
Post a link to your BQM on here.
Instructions for posting BQM Link
Under your BQM graph are two links in red.
Click the lower link (Share Live Graph) then click generate.
Copy the text in the Direct Link box, beware, there may be more text than you can see.
On here click the Link icon (2 links chain to the left of the camera icon)
In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.
Can you please
Type 192.168.0.1 (192.168.100.1 in Modem mode) into your browser URL bar and press enter.
Hub 2 & 3 When the page appears DO NOT LOG IN but click ‘Check Router Status’.
Hub 4 When the page appears LOG IN then click ‘Check Router Status’.
Copy and paste the contents of the Downstream, Upstream and Network Log tabs onto here, if you get a yellow warning click the Post button again. Use one post for each tab if you wish. Please do not use screen grabs.