Menu
Reply
jwt95
  • 4
  • 0
  • 0
Joining in
242 Views
Message 1 of 4
Flag for a moderator

Upgraded from M250 to M500 but speed has not increased

I upgraded from 250mbps to 500mbps on Tue 31/01/2023 but still getting the same speeds today (Tue 02/02/2023).

 

https://samknows.com/realspeed/ gives "Router" speed of 274mbps.

I've checked the downstream "Max Traffic Rate" which is 287500061 (287mb). I've performed a pinhole reset and this has not fixed it.

Hub 3.0 device information

The information below shows current status of this Hub 3.0.

Standard specification compliant: DOCSIS 3.0
Hardware version: 11
Software version: 9.1.2109.200

Network Log (MAC removed)

Time Priority Description

02/02/2023 21:46:16noticeLAN login Success;CM-VER=3.0;
01/01/1970 00:01:42criticalNo Ranging Response received - T3 time-out;CM-VER=3.0;
02/02/2023 21:07:46notice

LAN login Success;CM-

VER=3.0;

02/02/2023 21:06:57Warning!

LAN login FAILED : Incorrect Username / Password / ConnectionType;CM-

VER=3.0;

02/02/2023 20:59:52noticeSW download Successful - Via Config file
02/02/2023 20:57:7noticeSW Download INIT - Via Config file
01/01/1970 00:01:40criticalNo Ranging Response received - T3 time-out;CM-VER=3.0;
02/02/2023 19:19:42notice

LAN login Success;CM-

VER=3.0;

01/02/2023 10:56:45Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-

VER=3.0;

29/01/2023 08:10:30critical

No Ranging Response received - T3 time-out;CM-

VER=3.0;

29/01/2023 05:35:50notice

LAN login Success;CM-

VER=3.0;

29/01/2023 05:31:14Warning!

LAN login FAILED : Incorrect Username / Password / ConnectionType;CM-

VER=3.0;

28/01/2023 22:56:45Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-

VER=3.0;

28/01/2023 22:30:29critical

No Ranging Response received - T3 time-out;CM-

VER=3.0;

25/01/2023 10:56:45Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-

VER=3.0;

23/01/2023 08:22:17critical

No Ranging Response received - T3 time-out;CM-

VER=3.0;

22/01/2023 18:32:49Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-

VER=3.0;

17/01/2023 19:55:2criticalNo Ranging Response received - T3 time-out;CM-VER=3.0;
17/01/2023 14:20:44Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-

VER=3.0;

14/01/2023 15:06:35criticalNo Ranging Response received - T3 time-out;CM-VER=3.0;

 

General Configuration

Network access
Allowed
Maximum Number of CPEs
1
Baseline Privacy
Enabled
DOCSIS Mode
Docsis30
Config file
cmreg-vmdg505-bbt060+voc-b.cm



Primary Downstream Service Flow

SFID10424
Max Traffic Rate287500061
Max Traffic Burst42600
Min Traffic Rate0



Primary Upstream Service Flow

SFID10423
Max Traffic Rate27500061
Max Traffic Burst42600
Min Traffic Rate0
Max Concatenated Burst42600
Scheduling Type

Cable Modem StatusItem Status Comments

Acquired Downstream Channel (Hz)
331000000
Locked
Ranged Upstream Channel (Hz)
49600000
Locked
Provisioning State
Online

 

 

 

Tags (1)
0 Kudos
Reply
legacy1
  • 20.48K
  • 828
  • 2.2K
Alessandro Volta
226 Views
Message 2 of 4
Flag for a moderator

Re: Upgraded from M250 to M500 but speed has not increased

You have not been upgraded yet but did you really need the speed?
---------------------------------------------------------------
0 Kudos
Reply
jwt95
  • 4
  • 0
  • 0
Joining in
199 Views
Message 3 of 4
Flag for a moderator

Re: Upgraded from M250 to M500 but speed has not increased

Probably not. Anyhow, sorted now. Needed to activate the VM Stream device which I never wanted.
0 Kudos
Reply
Paul_DN
  • 10.7K
  • 546
  • 1.09K
Forum Team
Forum Team
143 Views
Message 4 of 4
Flag for a moderator

Re: Upgraded from M250 to M500 but speed has not increased

Hi jwt95,

Thank you for reaching out to us in our community and welcome, sorry to hear you weren't seeing your speed increase however has now changed since you activated the stream box, this is due to it being part of a package, if you do need any further help, please do not hesitate to reach back out.

Regards

Paul.

0 Kudos
Reply