Menu
Reply
Shootster
  • 1
  • 0
  • 0
Joining in
262 Views
Message 1 of 2
Flag for a moderator

Slow speed and loss of connection

45 minutes to get through to customer service, who tell you that you have an internal problem, when you haven’t done or changed anything when you had over 100mb before, then an engineer comes out and fiddles with the cable connections and all sorted now...and again for the third time in a week my connection is running at twenty Meg..laughable really but very annoying, especially when your working from home, if you have a problem outside, don’t blame Olie on us and make excuses, when you can’t deliver what you promise, VIRGIN MEDIA!! 

0 Kudos
Reply
MikeRobbo
  • 15.27K
  • 1.17K
  • 1.94K
Alessandro Volta
253 Views
Message 2 of 2
Flag for a moderator

Re: Slow speed and loss of connection

It can be difficult diagnosing problems without some basic information.

Have you checked the 'Check Service Status' at the top of the page ?

If nothing is showing try phoning 0800 561 0061, this will tell you of more local issues that may be affecting the area. Be aware that it isn't a manned line.

Go round all the accessible co-ax connections and ensure that they are finger tight.

If everything above is OK we need do some troubleshooting; to start with …

 

Can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you should post the link straight away.

Post a link to your BQM on here.

Instructions for posting BQM Link

Under your BQM graph are two links in red.

Click the lower link (Share Live Graph) then click generate.

Copy the text in the Direct Link box, beware, there may be more text than you can see.

On here click the Link icon (2 links chain to the left of the camera icon)

In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.

Then

 

Can you please

Type 192.168.0.1 (192.168.100.1 in Modem mode) into your browser URL bar and press enter. 

When the page appears DO NOT LOG IN but click ‘Check Router Status’.

Copy and paste the contents of the Downstream, Upstream and Network Log tabs onto here, if you get a yellow warning click the Post button again.

A Guru will be along soon to decipher the info.


*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
BT Smart Hub 2 with 70Mbs Download,18Mbs Upload, 9.17ms Latency & 0.35ms Jitter.
0 Kudos
Reply