Menu
Reply
Paulwibble
  • 1
  • 0
  • 0
Joining in
307 Views
Message 1 of 4
Flag for a moderator

Slow broadband Need Engineer.

New to cable having come off telephone connection. Contract for 200mbps getting no where near as low as 9 and never over 50. I need an engineer but 150 is always engaged. I have turned off then on, reset, tried it wired and wireless, cat 5 cable. so very disappointed after waiting for ages for installation.  I made a complaint.

0 Kudos
Reply
MikeRobbo
  • 15.27K
  • 1.17K
  • 1.95K
Alessandro Volta
289 Views
Message 2 of 4
Flag for a moderator

Re: Slow broadband Need Engineer.

What speeds do you get at >>  SamKnows << with a direct connection using a Cat 5E or better ethernet cable between the Hub in Router Mode and a 1Gbs capable Pc/Mac/Chromebook and no other devices connected ?

Then immediately after …

Can you Login to the Hub Settings and navigate to the Connected Devices page - what is the reported 'connection speed’ for the ethernet cable connected device you used for the speed test ?


*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
BT Smart Hub 2 with 70Mbs Download,18Mbs Upload, 9.17ms Latency & 0.35ms Jitter.
0 Kudos
Reply
MikeRobbo
  • 15.27K
  • 1.17K
  • 1.95K
Alessandro Volta
288 Views
Message 3 of 4
Flag for a moderator

Re: Slow broadband Need Engineer.

If possible can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you should post the link straight away.

Please post a 'Live Link' to your BQM on here straight away.

Instructions for posting BQM Live Link

Under your BQM graph are two links in red.

Click the lower link (Share Live Graph) then click generate.

Copy the text in the Direct Link box, beware, there may be more text than you can see.

On here click the Link icon (2 links chain to the left of the camera icon)

In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.


*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
BT Smart Hub 2 with 70Mbs Download,18Mbs Upload, 9.17ms Latency & 0.35ms Jitter.
0 Kudos
Reply
MikeRobbo
  • 15.27K
  • 1.17K
  • 1.95K
Alessandro Volta
287 Views
Message 4 of 4
Flag for a moderator

Re: Slow broadband Need Engineer.

Can you please

Type 192.168.0.1 (192.168.100.1 in Modem mode) into your browser URL bar and press enter. 

Hub 2 & 3 When the page appears DO NOT LOG IN but click ‘Check Router Status’.

Hub 4 When the page appears LOG IN then Advanced Settings > Tools > Network Status.

Copy and paste the contents of the Downstream, Upstream, Configuration and Network Log tabs onto here, if you get a yellow / straw box warning click the Post button again.

Use one post for each tab if you wish.

Please do not use screen grabs.

A Guru will be along soon to decipher the info.


*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
BT Smart Hub 2 with 70Mbs Download,18Mbs Upload, 9.17ms Latency & 0.35ms Jitter.
0 Kudos
Reply