Menu
Reply
Jono1990
  • 2
  • 0
  • 0
Joining in
192 Views
Message 1 of 5
Flag for a moderator

Hub 3 - 600mb plan

I have been having speed issues for a year now. engineer has been out and can't seem to see what the issue is. We have had 2 new replacement hub 3's and we still get no more than 80mb (this is stood right next to the router). Anyone else had these issues? They don't seem to want to swap it for a hub 4 even though we are not getting the minimum of 340mb

0 Kudos
Reply
MikeRobbo
  • 15.27K
  • 1.17K
  • 1.93K
Alessandro Volta
188 Views
Message 2 of 5
Flag for a moderator

Re: Hub 3 - 600mb plan

What speeds do you get at >>  SamKnows << with a direct connection using a Cat 5E or better ethernet cable between the Hub in Router Mode and a 1Gbs capable Pc/Mac/Chromebook and no other devices connected ?

Then immediately after …

Login to the Hub Settings and navigate to the Connected Devices page - what is the reported 'connection speed’ for the ethernet cable connected device you used for the speed test ?


*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
BT Smart Hub 2 with 70Mbs Download,18Mbs Upload, 9.17ms Latency & 0.35ms Jitter.
0 Kudos
Reply
MikeRobbo
  • 15.27K
  • 1.17K
  • 1.93K
Alessandro Volta
187 Views
Message 3 of 5
Flag for a moderator
Helpful Answer

Re: Hub 3 - 600mb plan

A bit more information is required, please post the following ...

Please do this before posting the Hub Data

If possible can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you should post the link straight away.

Please post a 'Live Link' to your BQM on here straight away.

Instructions for posting BQM Live Link

Under your BQM graph are two links in red.

Click the lower link (Share Live Graph) then click generate.

Copy the text in the Direct Link box, beware, there may be more text than you can see.

On here click the Link icon (2 links chain to the left of the camera icon)

In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.


*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
BT Smart Hub 2 with 70Mbs Download,18Mbs Upload, 9.17ms Latency & 0.35ms Jitter.
MikeRobbo
  • 15.27K
  • 1.17K
  • 1.93K
Alessandro Volta
185 Views
Message 4 of 5
Flag for a moderator

Re: Hub 3 - 600mb plan

Can you please

Type 192.168.0.1 (192.168.100.1 in Modem mode) into your browser URL bar and press enter. 

Hub 2 & 3 When the page appears DO NOT LOG IN but click ‘Check Router Status’.

Hub 4 When the page appears LOG IN then Advanced Settings > Tools > Network Status.

Please do not use screen shots.

Copy and paste the contents of the Downstream, Upstream, Configuration and Network Log tabs onto here, if you get a yellow / straw box warning click the Post button again.

Use one post for each tab if you wish.

A Guru will be along soon to decipher the info.


*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
BT Smart Hub 2 with 70Mbs Download,18Mbs Upload, 9.17ms Latency & 0.35ms Jitter.
0 Kudos
Reply
Jono1990
  • 2
  • 0
  • 0
Joining in
170 Views
Message 5 of 5
Flag for a moderator

Re: Hub 3 - 600mb plan

Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID

15370000040.8512064 qam1
23260000039.8512064 qam4
34620000039.8512064 qam2
43940000040.3512064 qam3

Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts

1ATDMA0000
2ATDMA0000
3ATDMA0000
4ATDMA0000
0 Kudos
Reply