Virgin Media Community

[mhussain14]

Hi VM Support

My hub4 just completed a software update as the light has changed to solid green ( modem mode ) and now the performance i was getting before has gone ( Wi-Fi slow, connection dropping ), I’ve also tested in router mode with the same problem also nearly all devices are wifi6 never had a issue with my connection since Gig1 upgrade, please could you check the line, I’ve posted my recent network log below.

Time Priority Description

Thu 23/02/2023 01:22:33	3	No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 23/02/2023 01:04:09	5	MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:01:55	4	Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:01:39	3	No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:01:39	3	Unicast Ranging Received Abort Response - initializing MAC;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:01:22	3	No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:01:22	3	Unicast Ranging Received Abort Response - initializing MAC;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 23/02/2023 00:41:56	3	No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 23/02/2023 00:35:35	5	MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:03:11	4	Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:02:51	3	No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:02:51	3	Unicast Ranging Received Abort Response - initializing MAC;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu 01/01/1970 00:01:30	3	No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;

[Client62]

The latest firmware update for a Hub 4 has broken the link aggregation (LAGG) functionality where a Hub 4 in modem mode could be connected via 2 or more network cables to secure the best speeds.  

If you use LAGG you might try with just 1 network cable from the Hub 4 to your Router.

[mhussain14]

Hi VM Support

Please could you check my connection, I am getting less them 300mbps constantly even after a power cycle of the hub4, these have been speed tested on Wi-Fi 6 devices ( Latest Gaming PC <Wired> iPad Pro/MacBook Pro and Galaxy S23 ultra ) 

Awaiting your response 

M Hussain

[Daniel_Et]

Hi @mhussain14 👋, thank you for your post. We're sorry to hear about the slow speeds you've been experiencing 😔

How long has this been the case and have you tried all the relevant standard checks, including rebooting your Hub? 

Advice on fixing slow speeds can be found here 😀 You can also test your speed here and run diagnostics through your My Virgin Media account here, to see if it detects any issues.

Furthermore, I'd suggest going to this link here to set up a 24-hour Broadband Quality Monitor graph. This will allow us to visually see what your connection is doing and it'll assist us in pinpointing where the issue could be coming from on our side.

Please make sure you have the Hub in router mode while you do these tasks. We look forward to hearing back from you.

Regards,
Daniel

[legacy1]

Do a speed test in modem mode with PC in safe mode with networking.