Rooter Report. Constantly loosing connections. Never really see over 30 on a 200mb supply. Sometimes drops out for hours. Often running under 10, or as low as 0.1. Cannot depend on it at all.
Cable Modem StatusItem Status Comments
ownstream bonded channels
Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
Downstream bonded channels
Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors
Upstream bonded channels
Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
Time Priority Description
Go to Answer
You only have 1 downstream channel?
If you reboot the hub does more come up?
No. Thats all I have ever had? How many should I have?
Can you remove any attenuators or have any unused splitters? If not you will need a technician
Found this answer helpful? Share it!
Hi Many thanks for replying. I have nothing extra added to the system other than cables between the rooter and devices. So not sure what an attenuator or splitter would come in the form of?Thanks again