cancel
Showing results for 
Search instead for 
Did you mean: 

New Hub 5

DCas
Tuning in

Hi folks. I changed my package and was sent a new Hub5. Change over is pretty straight forward apart from one thing. I had two Ethernet cables attached to my old hub one to port1 and one to port 4. On the instructions for the new hub it says if I had any Ethernet cables attached to my old hub I should attach them to the new hub. So far so good. My old hub had ports 1-4 all blank and as I said the engineer the last time had put them in ports 1 and 4. On my new hub port 4 has 2.5Gbps marked on it. Should I be using that port and if so which Ethernet cable goes into that port 

1 ACCEPTED SOLUTION

Accepted Solutions

BartekP
On our wavelength

As long as you don’t have any other 2.5 devices in your local network it doesn’t matter how you plug them in. 

See where this Helpful Answer was posted

2 REPLIES 2

BartekP
On our wavelength

As long as you don’t have any other 2.5 devices in your local network it doesn’t matter how you plug them in. 

That’s great thanks for the info and the quick reply.