Hi I would like to change the IP address of the router to 192.168.1.1 because I have many devices configured to 192.168.1.0/24. Unfortunately, Hub 3.0 does not allow it. I can choose 192.168.2.x, 192.168.0.x unfortunately I cannot 192.168.1.x.
Your post is not clear, either the VM hub is in router mode or it’s in modem mode with your own router. You should never refer to the VM hub as a router as this will always cause confusion. The VM hub is very restricted in the local LAN address that you can used, I think the 192.168.1.x range is used for A DMZ and cannot be changed.
Tudor There are 10 types of people: those who understand binary and those who don't and F people out of 10 who do not understand hexadecimal c1a2a285948293859940d9a49385a2
The screenshot in the orig post suggests you're trying to change the range of addresses the DHCP service dishes out to clients on the LAN.
I wouldn't expect it to let you change this, without also changing the LAN IP of the hub itself. Have you found such a setting ?
I'm sorry I don't have a SH3 I can easily check. Looking at a SH2 the LAN IP setting is at the top of the "DHCP Settings" page, but I guess the setting could very well be somewhere else for the SH3. Either that or it's hard-coded as 192.168.0.1 in which case your only option would be to use a separate router.