Menu
Reply
Highlighted
  • 26
  • 0
  • 0
Tuning in
733 Views
Message 1 of 35
Flag for a moderator

Hub 4 ip

Ok maybe a minor issue here but I can get into the settings on the router using 192.168.0.1 and 192.168.100.1 

0 Kudos
Reply
Highlighted
  • 13.22K
  • 522
  • 1.21K
Alessandro Volta
720 Views
Message 2 of 35
Flag for a moderator

Re: Hub 4 ip

Well yes of course you can.

0 Kudos
Reply
Highlighted
  • 26
  • 0
  • 0
Tuning in
711 Views
Message 3 of 35
Flag for a moderator

Re: Hub 4 ip

you should only be able to sign into the hub in modem mode using 192.168.100.1 as the 0.1 is reserved for router mode. 

0 Kudos
Reply
Highlighted
  • 19.48K
  • 1.7K
  • 4.25K
Very Insightful Person
Very Insightful Person
707 Views
Message 4 of 35
Flag for a moderator

Re: Hub 4 ip

if that was maybe a typo, could press and hold the reset for a good 30+ seconds, during this time dont reboot the hub and see if can then get access

As a Very Insightful Person, I'm here to share my knowledge. I don't work for Virgin Media.

Click to learn more about VIP

Use Kudos to say thanks

 

Mark as Helpful Answer if I've helped

0 Kudos
Reply
Highlighted
  • 26
  • 0
  • 0
Tuning in
703 Views
Message 5 of 35
Flag for a moderator

Re: Hub 4 ip

Nope it was not a typo as tried it again. it wont access it in router mode using 100.1 only 0.1 but reboot it into modem and can use both ip addresses 

0 Kudos
Reply
Highlighted
  • 26
  • 0
  • 0
Tuning in
701 Views
Message 6 of 35
Flag for a moderator

Re: Hub 4 ip

Ok having just reset the HUB its now back into router mode and guess what can now sign it to it using both 100.1 and 0.1 the ui is laggy as hell and the setting wont save first time. good thing is the heat is no longer a issue after load pop I had yesterday. my speed is the same 150mb so no change ther only getting 85% of the speed I should. I have no words of what a mess this new hub 4 is . I just pressed the modem mode button stated it was saving it failed and then pressed save again and it did it this time. 

0 Kudos
Reply
Highlighted
  • 13.22K
  • 522
  • 1.21K
Alessandro Volta
570 Views
Message 7 of 35
Flag for a moderator

Re: Hub 4 ip

Their is nothing stopping VM having modem mode with 192.168.100.1 or 192.168.0.1 to access the hub if you think about it.

In router mode you can access the hub in 192.168.100.1 or 192.168.0.1.

0 Kudos
Reply
Highlighted
  • 3.65K
  • 201
  • 611
Community elder
567 Views
Message 8 of 35
Flag for a moderator

Re: Hub 4 ip


@Ag1el1 wrote:

Ok maybe a minor issue here but I can get into the settings on the router using 192.168.0.1 and 192.168.100.1 


that isn't an issue.

0 Kudos
Reply
Highlighted
  • 26
  • 0
  • 0
Tuning in
515 Views
Message 9 of 35
Flag for a moderator

Re: Hub 4 ip

It is when virgin media think the hub is only in router mode when its in fact in modem mode. 

0 Kudos
Reply
Highlighted
  • 3.65K
  • 201
  • 611
Community elder
512 Views
Message 10 of 35
Flag for a moderator

Re: Hub 4 ip

post a screenshot showing the hub4 being accessible on 0.1 when in modem mode.
0 Kudos
Reply