Menu
Reply
Highlighted
  • 84
  • 0
  • 1
On our wavelength
584 Views
Message 1 of 14
Flag for a moderator

192.168.100.1 - Timeouts

Iv had no problems accessing my Hub 3 in modem mode using 192.168.100.1 up until today. No changes that I am aware of...

It times out every time, have tried multiple devices and a wired connection but still no access to the Hub 3.

Any ideas? Do I need a new hub?

I need to check my router stats, but now I cant!

Tags (1)
0 Kudos
Reply
Highlighted
  • 6.21K
  • 461
  • 1.08K
Hero
576 Views
Message 2 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

Disconnect your router and connect just a single device such as a laptop to the hub in order to post your downstream, upstream and logs.

--
Hub 3.0, TP-Link Archer C8, TP-Link TL-SG1008D 8-port gigabit switch, V6
My Broadband Ping - Roger's VM Broadband Connection
0 Kudos
Reply
Highlighted
  • 652
  • 120
  • 204
Forum Team
Forum Team
575 Views
Message 3 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

Hi, have you tried a pinhole reset, push reset button for 20seconds then release for 5. Repeat this 3 times.  Then see if you can log in using 192.168.0.1

 

Regards

Rich

Send Me a PM!


Here to help! I'm a Field Technician helping out from home. Find out more
REFER A FRIEND AND SHARE £100 BETWEEN YOU

****************** ASK ME HOW ******************

Tags (1)
0 Kudos
Reply
Highlighted
  • 84
  • 0
  • 1
On our wavelength
562 Views
Message 4 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

Will that just be popping me back over to router mode?

Im extremely confused by it all.

0 Kudos
Reply
Highlighted
  • 84
  • 0
  • 1
On our wavelength
550 Views
Message 5 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

So I have tried this rather long winded reset process and I'm still facing the same issue.

Anymore suggestions?

I cant just plug in as all Macs and laptops don't have have Ethernet ports, so needed it wirelessly!

Linksys (Velop) have been investigating and think it is a subnet issue (found a thread on these forums, I have since restarted my Mac and lost the link), this however means nothing to me but hope somebody will understand.

Cheers 

0 Kudos
Reply
Highlighted
  • 14.32K
  • 593
  • 1.37K
Alessandro Volta
528 Views
Message 6 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

What own router do you have (not hub) and whats its LAN IP gateway and subnet?

---------------------------------------------------------------
0 Kudos
Reply
Highlighted
  • 84
  • 0
  • 1
On our wavelength
477 Views
Message 7 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

I have a Linksys Velop.

 

0 Kudos
Reply
Highlighted
  • 15.73K
  • 1.64K
  • 2.69K
Very Insightful Person
Very Insightful Person
474 Views
Message 8 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

Not of immediate help but.. I use exclusively Apple equipment - for the lappys that have no ethernet ports I have a couple of adaptors - one is T'bolt-RJ45 the other is USB3-RJ45 (other flavors are available) these are cheap at the usual online places - as are runs of good Cat6 cable. Useful to have in your man-cupboard for ocassions like this.

--------------------
John
--------------------

My services: HD TV on VIP (+ Sky Sports & Movies & BT sport), x3 V6 boxes (1 wired 2 WiFi,) SH2 in modem mode with Airport Extreme Router. On VIVID200, Talk Anytime Phone, x2 Mobile SIM only iPhones.
0 Kudos
Reply
Highlighted
  • 84
  • 0
  • 1
On our wavelength
468 Views
Message 9 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

Ok, the most bizarre thing has just occurred. Thought I would just ping 192.168.100.1 and it was fine so I tried in a browser and boom its working for now!

Now how to post the logs correctly, and not reveal too much personal data. Ideas?

Very strange, and im not sure anymore whether its the modem or the Velop.

Cheers

0 Kudos
Reply
Highlighted
  • 15.73K
  • 1.64K
  • 2.69K
Very Insightful Person
Very Insightful Person
461 Views
Message 10 of 14
Flag for a moderator

Re: 192.168.100.1 - Timeouts

My standard" instructions".

. In your browser’s URL box type in http://192.168.0.1 (or http://192.168.100.1 - if in modem mode) and hit return. On the first page up [there should be no need to login if you have done so before] click on the “router status” icon/text at bottom-middle of first page up and then copy/paste 3 FULL sets of data onto here – from the Downstream, Upstream, & Network Logs pages. Don't worry too much about the formatting it can be easily read & DON’T include personal data or MAC addresses - blank them out - if you copy/paste the data, the board software will do this for you (you may need to click the "submit" button a second time).

--------------------
John
--------------------

My services: HD TV on VIP (+ Sky Sports & Movies & BT sport), x3 V6 boxes (1 wired 2 WiFi,) SH2 in modem mode with Airport Extreme Router. On VIVID200, Talk Anytime Phone, x2 Mobile SIM only iPhones.
0 Kudos
Reply