Virgin Media Community

[Yanki77]

Hello Virgin community and best regards. Question about HUB3 security and updates. It is suggested by a message from Apple that my HUB3 signal security is insufficient, it should be encrypted on WPA3 or at least on WPA 2 AS. My HUB3 is currently connected to the bridge and works as a modem, the information about the Software Version shows me 9.12109.200 and I can get maximum encryption at the WPA2 level, which is quite dangerous. I would like to ask for guidance if the Update is Automatic or do I have to call Virgin and ask for technical support

[goslow]

---

@Yanki77 wrote:

Hello Virgin community and best regards. Question about HUB3 security and updates. It is suggested by a message from Apple that my HUB3 signal security is insufficient, it should be encrypted on WPA3 or at least on WPA 2 AS. My HUB3 is currently connected to the bridge and works as a modem, the information about the Software Version shows me 9.12109.200 and I can get maximum encryption at the WPA2 level, which is quite dangerous. I would like to ask for guidance if the Update is Automatic or do I have to call Virgin and ask for technical support

---

See

https://community.virginmedia.com/t5/Networking-and-WiFi/iOS-14-Weak-Security/td-p/4410050

for the VM hub in router mode. If you are using the hub in modem mode and have your own router, set your router to WPA2 PSK.

[Travis_M]

Hi @Yanki77 

Thanks for posting on our community forum!

The iOS Weak Security message is a known issue but is nothing to worry about, I can assure you the security is up to scratch. If you can follow the above link provided by the very helpful goslow this should correct the message for you