Menu
Reply
Highlighted
  • 143
  • 3
  • 1
Dialled in
460 Views
Message 1 of 7
Flag for a moderator

Upstream Channel Keeps Changing

I have noticed that the Upstream Channel number keeps changing - straight after a hub reboot it is a round number, just like the downstream channel, but the shortly after the upstream channel number seems to wander up and down:

Cable Modem StatusItem Status Comments
Acquired Downstream Channel (Hz)
299000000
Locked
Ranged Upstream Channel (Hz)
60299999
Locked
Provisioning State
Online
 
 

Any idea why?

 

0 Kudos
Reply
Highlighted
  • 143
  • 3
  • 1
Dialled in
406 Views
Message 2 of 7
Flag for a moderator

Re: Upstream Channel Keeps Changing

And it has changed again:

Router status
 
Cable Modem StatusItem Status Comments
Acquired Downstream Channel (Hz)
299000000
Locked
Ranged Upstream Channel (Hz)
60300056
Locked
Provisioning State
Online
 
 
 
0 Kudos
Reply
Highlighted
  • 143
  • 3
  • 1
Dialled in
388 Views
Message 3 of 7
Flag for a moderator

Re: Upstream Channel Keeps Changing

And again:

Cable Modem StatusItem Status Comments

Acquired Downstream Channel (Hz)
299000000
Locked
Ranged Upstream Channel (Hz)
60300021
Locked
Provisioning State
Online
 

 

0 Kudos
Reply
Highlighted
  • 3.68K
  • 307
  • 1.07K
Community elder
384 Views
Message 4 of 7
Flag for a moderator

Re: Upstream Channel Keeps Changing

ooh err!  That's a new one on me.  My Superhub 2ac certainly doesn't do that.  Maybe a reporting bug in the firmware?

 

 

********* SuperHub 2ac - Asus rt-ac68u Router - Vivid 100Mbps **********

Electron
0 Kudos
Reply
Highlighted
  • 547
  • 44
  • 172
Rising star
372 Views
Message 5 of 7
Flag for a moderator

Re: Upstream Channel Keeps Changing

My ranged upstream channel also varies throughout the day, starting off after a reboot as a round number and tending to vary to the same values, right now it's 39400059 Hz.

If it's not causing any upstream issues I guess it's worth ignoring?
0 Kudos
Reply
Highlighted
  • 11.8K
  • 1.08K
  • 2.56K
Alessandro Volta
359 Views
Message 6 of 7
Flag for a moderator
Helpful Answer

Re: Upstream Channel Keeps Changing

It is just VM's CMTS fine tuning the upstream frequency through the DOCSIS Station Maintenance Ranging Response messages that the CMTS sends the Hub every 30secs in response to the Hub's Ranging request message.

Nothing to worry about.

 

0 Kudos
Reply
Highlighted
  • 143
  • 3
  • 1
Dialled in
344 Views
Message 7 of 7
Flag for a moderator

Re: Upstream Channel Keeps Changing

OK thanks for the reassurance.

I raised the issue as I've never noticed it before, only after the .610 firmware, I was just curious as to why this should have started happening.

Everything seems to be working fine, thanks again.

 

0 Kudos
Reply