on 07-11-2022 15:16
I have a speed increase but cannot seem to get new speed, its doubled. Virgin are telling me to remove mesh system and then I will get new speed. Surely this isn't right? I only got the mesh system as the wifi was so awful without it. I've changed speed before without any issues.
Answered! Go to Answer
08-11-2022 14:07 - edited 08-11-2022 14:11
Did you re-connect the Deco's in the correct sequence?
And connect the first unit with a New Cat6a cable to be sure.
There was this thread where they were limited to 100 on the Deco's too - this sorted it - worth checking.
DECO unit QoS defaults to 100 - message 2 in….
https://community.virginmedia.com/t5/Speed/Upgraded-from-100-to-200-with-no-difference/td-p/4931648
on 07-11-2022 15:28
on 07-11-2022 16:00
on 07-11-2022 16:02
on 07-11-2022 16:34
"Virgin are telling me to remove mesh system and then I will get new speed" offshore customer service talking rubbish as usual. Have you power off your hub for a few minutes and then turned it on again? This prompts the download of the new config file. If you go into your hub on 192.168.100.1 and go to <configuration> tab you will see the up/downstream figures, post them here.
on 07-11-2022 17:14
on 07-11-2022 18:01
on 07-11-2022 19:55
on 07-11-2022 19:57
Recently added the X20 as the main
on 07-11-2022 20:19