I had this printer wireless on my network for years, TP-Link Archer VR900.
I switched to the Hub3 last week and eventually got it to work with that, I had to resort to WPS connection which allowed me to use the samsung setIP app to connect to it, change the 192.168.1... to 192.168.0... after that it connected properly.
Like many other VM customers I now have the Hub3 in modem mode and connected to my Archer VR900, I changed the SSID to same as was on the Hub3 and the IP range to the same as the Hub3.
The printer powers on and the blue wifi light goes solid which confirms its connected, but it is not showing as connected when I log on to my router nor is it findable on any PC or Mac
I managed to get it to print a network report (directly from the printer) it shows its connected to the 2Ghz channel and it has an assigned IP 192.168.0.41