Menu
Reply
Highlighted
  • 1
  • 0
  • 0
Joining in
78 Views
Message 1 of 3
Flag for a moderator

Ongoing issues with 1GB/Hub4?

Hi,

Can someone from the forum team take a look at my connection - this is a recurrent issue that happens regularly (as I have posted about in the past) and has only occurred since I took out the 1GB connection with a Hub4 - prior to this having a 350Mb connection and a Hub3 I (surprisingly) had zero issues with my connection.

I’m getting fed up with rebooting my connection on a two/three times weekly basis just to maintain any sort of stability.

0 Kudos
Reply
Highlighted
  • 11.82K
  • 925
  • 1.52K
Alessandro Volta
73 Views
Message 2 of 3
Flag for a moderator

Re: Ongoing issues with 1GB/Hub4?

What is wrong with your connection ?

Have you checked the 'Check Service Status' at the top of the page ?

If nothing is showing try phoning 0800 561 0061, this will tell you of more local issues that may be affecting the area. Be aware that it isn't a manned line.

Go round all the accessible internal and external co-ax connections and ensure that they are finger tight.

If everything above is OK we need do some more troubleshooting; to start with …

 

Can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you should post the link straight away.

Post a link to your BQM on here.

Instructions for posting BQM Link

Under your BQM graph are two links in red.

Click the lower link (Share Live Graph) then click generate.

Copy the text in the Direct Link box, beware, there may be more text than you can see.

On here click the Link icon (2 links chain to the left of the camera icon)

In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.

Then

 

Can you please

Type 192.168.0.1 (192.168.100.1 in Modem mode) into your browser URL bar and press enter. 

Hub 2 & 3 When the page appears DO NOT LOG IN but click ‘Check Router Status’.

Hub 4 When the page appears LOG IN then click ‘Check Router Status’.

Copy and paste the contents of the Downstream, Upstream and Network Log tabs onto here, if you get a yellow warning click the Post button again. Use one post for each tab if you wish. Please do not use screen grabs.

A Guru will be along soon to decipher the info.

***********************************************************************************************************************************

Mike Robinson
Semi-Retired Aircraft Engineer & Computer Based Training and Learning Designer for many of the world's Military Arms.

My Broadband Ping - Mike Robbo
0 Kudos
Reply
Highlighted
  • 24.7K
  • 1.42K
  • 3.14K
Alessandro Volta
62 Views
Message 3 of 3
Flag for a moderator

Re: Ongoing issues with 1GB/Hub4?

Define "issues" and "stability".


*****
If you think my answer has helped - please provide me with a Kudos rating and mark as Helpful Answer!!
I do not work for Virgin Media - all opinions expressed are of my own and all answers are provided from my own and past experiences.
Office 365, Dynamics CRM and Cloud Computing Jedi
0 Kudos
Reply