Menu
Reply
Highlighted
  • 55
  • 0
  • 0
Tuning in
279 Views
Message 1 of 10
Flag for a moderator

No internet

Hi all 

having really bad problems with broadband super hub wireless and wired both keep cutting off been terrible for last 2 months really fed up of this been terrible service for last 12 months was great before then keep replacing super hub but few days later but to intermittent again 

0 Kudos
Reply
Highlighted
  • 6.51K
  • 490
  • 860
Hero
270 Views
Message 2 of 10
Flag for a moderator

Re: No internet

Go round all the accessible co-ax connections and ensure that they are finger tight.

If everything above is OK we need do some troubleshooting; to start with …

Can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you can post the link straight away.

Post a link to your BQM on here.

Instructions for posting BQM Link

Under your BQM graph are two links in red.

Click the lower link (Share Live Graph) then click generate.

Copy the text in the Direct Link box, beware, there may be more text than you can see.

On here click the Link icon (2 links chain to the left of the camera icon)

In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.

Then

 

Can you please

Type 192.168.0.1 (192.168.100.1 in Modem mode) into your browser URL bar and press enter. 

When the page appears DO NOT LOG IN but click ‘Check Router Status’.

Copy and paste the contents of the Downstream, Upstream and Network Log tabs onto here, if you get a yellow warning click the Post button again.

A Guru will be along soon to decipher the info.

***********************************************************************************************************************************

Mike Robinson
Aircraft Engineer & Computer Based Training and Learning Designer for many of the world's Military Arms.


My Broadband Ping - 26_Aug_2020
0 Kudos
Reply
Highlighted
  • 55
  • 0
  • 0
Tuning in
225 Views
Message 3 of 10
Flag for a moderator

Re: No internet

Unfortunately won’t let me reply with photos but activity is full of errors and warnings 

41F04D65-A588-4EE3-8061-706343E5BEFE.png

0 Kudos
Reply
Highlighted
  • 55
  • 0
  • 0
Tuning in
201 Views
Message 4 of 10
Flag for a moderator

Re: No internet

Network Log

Time Priority Description

17/08/2020 00:43:17Warning!LAN login FAILED : Incorrect Username / Password / ConnectionType;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
17/08/2020 00:27:39noticeLAN login Success;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
16/08/2020 23:16:48Warning!LAN login FAILED : Incorrect Username / Password / ConnectionType;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
16/08/2020 23:15:37noticeLAN login Success;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 12:02:42ErrorDHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 11:44:23ErrorDHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 10:37:23ErrorDHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 10:26:6ErrorDHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 09:44:52ErrorDHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 09:33:35ErrorDHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 08:52:22ErrorDHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
14/08/2020 08:41:4ErrorDHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
13/08/2020 07:30:10Warning!Lost MDD Timeout;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
13/08/2020 07:30:4criticalSYNC Timing Synchronization failure - Loss of Sync;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
13/08/2020 07:30:4Warning!RCS Partial Service;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
13/08/2020 07:30:4criticalSYNC Timing Synchronization failure - Loss of Sync;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
13/08/2020 07:30:3Warning!RCS Partial Service;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
12/08/2020 23:50:26ErrorDHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
12/08/2020 23:32:6ErrorDHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
12/08/2020 22:25:7ErrorDHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
0 Kudos
Reply
Highlighted
  • 55
  • 0
  • 0
Tuning in
199 Views
Message 5 of 10
Flag for a moderator

Re: No internet

status
Upstream bonded channelsChannel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
1462000004.95512064 qam1
2326000054.8512064 qam3
3394000004.85512064 qam2
4258000534.775512064 qam4


Upstream bonded channelsChannel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
1ATDMA0000
2ATDMA0000
3ATDMA0
0 Kudos
Reply
Highlighted
  • 55
  • 0
  • 0
Tuning in
193 Views
Message 6 of 10
Flag for a moderator

Re: No internet

Downstream bonded channelsChannel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
1203000000-2.437256 qam9
2139000000-237256 qam1
3147000000-237256 qam2
4155000000-2.237256 qam3
5163000000-2.237256 qam4
6171000000-2.237256 qam5
7179000000-2.237256 qam6
8187000000-2.237256 qam7
9195000000-2.437256 qam8
10211000000-237256 qam10
11219000000-1.737256 qam11
12227000000-1.937256 qam12
13235000000-237256 qam13
14243000000-2.237256 qam14
15251000000-2.537256 qam15
16259000000-2.537256 qam16
17267000000-2.537256 qam17
18275000000-2.438256 qam18
19283000000-2.238256 qam19
20291000000-2.237256 qam20
21299000000-2.437256 qam21
22307000000-2.538256 qam22
23315000000-2.438256 qam23
24323000000-2.538256 qam24
0 Kudos
Reply
Highlighted
  • 4.71K
  • 866
  • 1.25K
Very Insightful Person
Very Insightful Person
157 Views
Message 7 of 10
Flag for a moderator

Re: No internet

Hello

As the images contain the MAC address this is classed as personal information and should not be posted on a public forum, as well as being against forum rules, so this has been rejected.
Regards Mike

I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more

Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks

0 Kudos
Reply
Highlighted
  • 2.98K
  • 176
  • 236
Forum Team
Forum Team
85 Views
Message 8 of 10
Flag for a moderator

Re: No internet

Morning deano1,

 

Thanks for posting, and sorry to see you're having some issues with your connection.

 

I can see you've managed to speak with us since posting and have a technician visit arranged, please let us know how this goes.

 

Alex_Rm

0 Kudos
Reply
Highlighted
  • 55
  • 0
  • 0
Tuning in
50 Views
Message 9 of 10
Flag for a moderator

Re: No internet

Hi had engineer out Thursday was seemed ok but still getting some timeouts and slow speeds ? 

0 Kudos
Reply
Highlighted
  • 6.51K
  • 490
  • 860
Hero
48 Views
Message 10 of 10
Flag for a moderator

Re: No internet

Can you set up a Broadband Quality Monitor (BQM) at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you can post the link straight away.

Post a link to your BQM on here.

Instructions for posting BQM Link

Under your BQM graph are two links in red.

Click the lower link (Share Live Graph) then click generate.

Copy the text in the Direct Link box, beware, there may be more text than you can see.

On here click the Link icon (2 links chain to the left of the camera icon)

In the URL box paste the link you copied and in the ‘text to display’ box write My BQM then click OK - you can post the link straight away.

***********************************************************************************************************************************

Mike Robinson
Aircraft Engineer & Computer Based Training and Learning Designer for many of the world's Military Arms.


My Broadband Ping - 26_Aug_2020
0 Kudos
Reply