on 09-02-2023 11:28
Hub 3 installed a few days ago and all working except Epson printer XP202. Worked OK with previous broadband supplier. The printer does not have a control panel so at a loss on how to change SSID and password? Any suggestions would be appreciated.
on 09-02-2023 11:38
The manuals for the Epson XP202 are here :-
https://www.epson.co.uk/en_GB/support/sc/epson-expression-home-xp-202/s/s1096
Find the process that was followed to connect to the last broadband provider and repeat it with the Hub 3.
It might be a "PAIR WPS" process that needs to be followed.
Or there may be manual methods via USB or network cables.
Our Epson is network cabled - very simple and reliable.
on 09-02-2023 12:10
Have tried your suggestions but no joy.
I can use a cable but the printer is not near the laptop so need to get WiFi working somehow
Many thanks for your help
DAVENIC
on 09-02-2023 12:23
there are many FAQs here
https://www.epson.co.uk/en_GB/support/sc/epson-expression-home-xp-202/s/s1096
this one is WiFi setup over USB
https://www.epson.co.uk/en_GB/faq/KA-01615/contents?loc=en-us
on 09-02-2023 15:50
I managed to eventually get the printer connected to the Virgin WiFi using the set up wizard and usb cable.
Very hit and miss but got there in the end.
Many thanks for your help
DAVENIC