Recently upgraded to a Hub 4
200mb connection - speedtest says doing well
yesterday i was presenting and people said there was a 5 second delay in my resposes when i was in fact answering straight away
Web pages sometimes stall on a range of devices
TV is connected via Lan and have regular "wired internet disconnected" notifications followed near instantly with "connected to a wired network"
Would be good if someone could have a look below and advise please
Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
3.0 Downstream channels
Channel Lock Status RxMER (dB) Pre RS Errors Post RS Errors
Go to Answer
3.1 Downstream channels
Channel Channel Width (MHz) FFT Type Number of Active Subcarriers Modulation (Active Profile) First Active Subcarrier (Hz)
Channel ID Lock Status RxMER Data (dB) PLC Power (dBmV) Correcteds (Active Profile) Uncorrectables (Active Profile)
3.0 Upstream channels
Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
Time Priority Description
This will need an engineer to put right.
You can either call in (08:00 is the best time) or wait on here for a few days (6 to 7 days average) until one of the VM Forum Staff comes along.
If you wait on here Do Not bump the thread it will put it further down the VM 'to do list'.
Found this answer helpful? Share it!
Thanks for posting, I'm sorry to see you've been having some issues with your connection.
I've been able to locate your account using your forum details and can see you've been able to contact us to arrange an engineer visit.
Please pop back after this and let us know how you get on 🙂