3 weeks ago
Do any of you know how to perform a factory reset on Hub 4?
Try the same method as used for the Hub 3 ...
DO NOT DO THIS if the password on the base of the Hub is not legible or missing.
Instructions for Hub 3
Disconnect all unneeded ethernet cables from the rear of the Hub.
With the Hub Powered on use a paperclip or similar (I use a mobile phone SIM Slot tool) and do a pinhole reset.
Depress the pinhole switch for a timed 60 seconds then release.
DO NOT reboot the hub but allow it 5 to 10 minutes for it to boot itself up.
2 weeks ago
Thank you soo much, that worked perfectly.