Virgin Media Community

[rolandjyoung]

Good Morning

Is there a bug in the latest Hub 3.0 software? what I have noticed is connected ethernet devices are no-longer showing. (bot the Home & Connected Devices pages shows no ethernet connected devices anymore, but I have two ethernet devices working perfectly and connected.

The only place I can see them is through ->  Advanced settings -> DHCP.

Ethernet connected used to show on both Home &   connected devices pages....which makes me think this is a bug in the software.

Anyone seeing the same?

[Client62]

Hub 3 Router mode, Software Version : 9.1.2208.100

For devices with a DHCP allocated IP, our Hub 3 is showing the Ethernet connected devices on the Home page and also on the DHCP Attached Devices.

For our 2 DHCP Reserved list devices ( both are Ethernet connected ) neither device is shown as Ethernet connected devices on the Home page, also not shown on DHCP Attached Devices.

The firmware version does not appear to have changed in some months, but for the WiFi devices the figures for the connection rate are no longer correct. Where a 5Ghz Bluray player located 6 feet from the Hub used to show at 260Mb/s connection it now often shows as 0Mb/s yet works perfectly streaming Netflix.

[legacy1 · Accepted solution]

---

@rolandjyoung wrote:

Good Morning

Is there a bug in the latest Hub 3.0 software?

---

There are always bugs in router mode and VM might as well remove this Connected Devices.

[rolandjyoung]

I have exactly this issues as you mentioned... my two Ethernet connected devices have reserved DHCP IP addresses. I have 1 Wifi connected device with a reserved IP and that does show.

I agree the Home and Connected Devices Pages are no-longer useful or in any way accurate.