Menu
Reply
LukeBostwick
  • 7
  • 0
  • 0
Tuning in
100 Views
Message 1 of 3
Flag for a moderator

Dynamic Range Window violation warning in hub 5 network log

I just checked the network log on my hub 5 and roughly every hour there is a warning saying "Dynamic Range Window Violation". I haven't noticed any issue with my connection or anything but just wondering what this warning is and if it's anything to worry about or something that needs fixing? The warning is as follows (MAC address removed);

02-03-2023 11:36:29warningRNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW;CM-MAC=;CMTS-MAC=;CM-QOS=1.1;CM-VER=3.1;
02-03-2023 11:36:29warningDynamic Range Window violation
02-03-2023 10:32:36warningDynamic Range Window violation
02-03-2023 10:32:36warningRNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW;CM-MAC=;CMTS-MAC=;CM-QOS=1.1;CM-VER=3.1;
0 Kudos
Reply
jem101
  • 4.82K
  • 483
  • 2.13K
Superstar
82 Views
Message 2 of 3
Flag for a moderator

Re: Dynamic Range Window violation warning in hub 5 network log


@LukeBostwick wrote:

I just checked the network log on my hub 5 and roughly every hour there is a warning saying "Dynamic Range Window Violation". I haven't noticed any issue with my connection or anything but just wondering what this warning is and if it's anything to worry about or something that needs fixing? The warning is as follows (MAC address removed);

02-03-2023 11:36:29warningRNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW;CM-MAC=;CMTS-MAC=;CM-QOS=1.1;CM-VER=3.1;
02-03-2023 11:36:29warningDynamic Range Window violation
02-03-2023 10:32:36warningDynamic Range Window violation
02-03-2023 10:32:36warningRNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW;CM-MAC=;CMTS-MAC=;CM-QOS=1.1;CM-VER=3.1;

No it's not too abnormal, the Hub 5 does seem to be a bit more 'chatty' as regard the periodic adjustments that it is making to optimise the connection.

0 Kudos
Reply
Robert_P
  • 5.51K
  • 251
  • 475
Forum Team
Forum Team
43 Views
Message 3 of 3
Flag for a moderator

Re: Dynamic Range Window violation warning in hub 5 network log

Hi LukeBostwick

 

Thanks for posting in regards to your hub 5 and the reporting, from checking the connection and equipment everything seems to be fine in regards to levels and spec. Have you noticed any issues at the times of the reports?

 

Rob

0 Kudos
Reply