2 weeks ago
Either set the deco to work in bridge mode or follow these instructions to set up modem mode...
Log into the hub on http://192.168.0.1 and select the option to put the hub into modem mode
The hub will then reboot and come back up in modem mode - give it five minutes to settle down
Disconnect all ethernet cables from the hub
Power off the Hub and your router/mesh system
Connect your router/mesh system to the hub via ethernet cable and switch it on - leave it five minutes to settle down
Power on the hub and leave it five minutes to settle down
Should all be working.
Should this solve the issue??
Hub 3 has solid red light at the bottom of it. Is this normal in modem mode??
it’s marketed as “magenta” but it can look very red from some angles 😉