Menu
Reply
zhoalex999
  • 3
  • 0
  • 0
Joining in
140 Views
Message 1 of 4
Flag for a moderator

2.4 ghz signal is not working, impossible to enable it

Hello. My hub 4 is not working on 2.4 ghz signal. It is disabled and I can not enable it. It switches off automatically. I have rebooted hub and still no result. When I try to enable it in wireless settings It switches off. So I can't connect any device that is using 2.4 ghz signal. 5 ghz signal is working fine. Waiting for some advice to resolve this issue. 

Tags (1)
0 Kudos
Reply
lotharmat
  • 881
  • 61
  • 125
Well-informed
137 Views
Message 2 of 4
Flag for a moderator

Re: 2.4 ghz signal is not working, impossible to enable it

Hiya,

Next thing to try is a pinhole reset!! = Make sure you have the default passwords for the hub!!!!

Disconnect any ethernet cables and press and hold the reset switch with a paperclip or Sim-Removal tool for at least 60 seconds

Give the hub about 10 minutes to re-sync properly and then try and see if you can re-enable the 2.4 network!



------------------------------------------------------------------
Hub 3 - Modem Mode - TP-Link Archer C7

0 Kudos
Reply
zhoalex999
  • 3
  • 0
  • 0
Joining in
130 Views
Message 3 of 4
Flag for a moderator

Re: 2.4 ghz signal is not working, impossible to enable it

Did it. Seems everything worked. Signal is back. Thanks for this advice. 👍

0 Kudos
Reply
lotharmat
  • 881
  • 61
  • 125
Well-informed
127 Views
Message 4 of 4
Flag for a moderator

Re: 2.4 ghz signal is not working, impossible to enable it

Yay!!

Glad it worked!



------------------------------------------------------------------
Hub 3 - Modem Mode - TP-Link Archer C7

0 Kudos
Reply