on 05-08-2021 17:57
I just installed a new v6 box. Seemed pretty straightforward but I'm not able to access any apps. Iplayer, STV, More4, I just click on the icon and nothing happens. I can't even get into the help app to configure my remote.
I upgraded my old tivo because of service issues, particularly being unable to access box sets or catch up tv, but this is no better.
Is the problem with the broadband rather than the box, or is it just virgin being rubbish ?
Answered! Go to Answer
on 05-08-2021 18:10
The major difference between the V6 & the TiVo is that your old box had an in-built internet connection, the V6 doesn't - and requires a connection via your homehub for all online functions. That means OnDemand, streaming apps, EPG & software updates.
It sounds from your description that this connection isn't working, so the first obvious question - how is your V6 connected to your homehub? Is it an Ethernet cable or is it wireless?
Follow Home > Help & Settings > Settings > Network, and report what's displayed in the top-right.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 05-08-2021 18:10
The major difference between the V6 & the TiVo is that your old box had an in-built internet connection, the V6 doesn't - and requires a connection via your homehub for all online functions. That means OnDemand, streaming apps, EPG & software updates.
It sounds from your description that this connection isn't working, so the first obvious question - how is your V6 connected to your homehub? Is it an Ethernet cable or is it wireless?
Follow Home > Help & Settings > Settings > Network, and report what's displayed in the top-right.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 05-08-2021 19:01
Its an ethernet connection. My old tivo was connected to the d-link modem by ethernet cable, which i guess is what the engineer who installed it did. When i set up the new box it said I should connect to the virgin hub, so I did.
on 05-08-2021 19:08
On the TiVo, the Ethernet cable's function was for multiroom streaming and not internet, but there you go.
Is the Ethernet cable securely connected to the V6, and to the hub's Ethernet port? If in doubt, disconnect/reconnect them at both ends.
Follow Home > Help & Settings > Settings > Network, and report what's displayed in the top-right.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 05-08-2021 19:59
There's an IP address listed. Network Connection Last status is succeeded, Network status is connected. Connection test succeeded, DNS Resolution test succeeded, port configuration test failed.
on 05-08-2021 20:20
The port config test result is meaningless, but everything else looks good.
Can you access OnDemand services ok? Find a programme in the backwards TV Guide, press "OK" to "watch from CatchUp". This uses the same internet connection as all the other online functions on your V6.
Depending on the answer, there may be no harm in rebooting your box once to cover "the obvious". Either Home > Help & Settings > Clear or restart (if you can) or use the on/off rocker switch on the back of the box.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
07-08-2021 12:45 - edited 07-08-2021 12:46
@iainplummer wrote:Its an ethernet connection. My old tivo was connected to the d-link modem by ethernet cable, which i guess is what the engineer who installed it did. When i set up the new box it said I should connect to the virgin hub, so I did.
From what you've described, it sounds like your Super Hub is in modem mode and the D-Link is being used as the router, so if this is the case, you need to connect the V6's Ethernet cable into one of the LAN ports on the D-Link and not the Super Hub.
on 07-08-2021 12:57
Valid point - I may have missed checking that.
@iainplummer - if you're using your VM Superhub as a combined modem & router, then all the Ethernet ports are active and can be used. If your SH is in modem mode and you're using your own router, then only 1 Ethernet port on the SH is active to enable a connection to your own router - which your V6 will need to connect to.
Make sure of how your kit is connected.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 09-08-2021 10:38
Thanks - actually i did the opposite - connected the v6 box direct to the hub, unplugged the d-link completely and that seems to work !
on 09-08-2021 10:47
@iainplummer wrote:Thanks - actually i did the opposite - connected the v6 box direct to the hub, unplugged the d-link completely and that seems to work !
So you've done one of two things (just so you're aware)
1: Having your SH in modem mode, and by using the 1 usable Ethernet port (that's intended for your router), have removed the ability to connect any other devices.
2: Switched your SH back to router mode and your external router isn't being used.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks