on 31-10-2020 15:22
Hello everyone
Is anyone else having a constant issue with being unable to watch catch up, on demand, Netflix, Amazon prime & WiFi going off? It most often pops up with an error code C233. Landline dead for 2 weeks now. Can't connect to the downstairs box to access recordings there. This has been going on well over a year. Ive spoken to Virgin on the phone a few times when it all started plus gone through the live chat etc and done what they've suggested but it still keeps going off and on randomly. They sent a new box so we connected that but no difference! Sometimes the internet is on (as I can access internet from my laptop) but all the On demand type channels are not available. I have complained now via Virgins website as I can never get through on the phone and its just a recorded message telling you to go online. Grrrrrrrr. I have asked for a refund of 50% of what I've paid them over the last 12 months
Answered! Go to Answer
on 02-12-2021 12:26
Some of you might be seeing this error message due to the outage outlined here: https://community.virginmedia.com/t5/Virgin-TV-V6/National-TV-Outage/td-p/4877466
Thanks,
on 31-10-2020 16:31
C233 indicates a loss of internet connectivity to your V6 box.
If you follow Home > Help & Settings > Settings > Network, the top-right corner will indicate your WiFi signal strength (among other things) - what does it say?
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 31-10-2020 17:00
Thanks for the reply. It says Signal: 50% (marginal) I'm thinking thats not good?!
on 31-10-2020 17:06
It certainly won't be helping the cause!
If it's using the 5Ghz band, try experimenting with 2.4Ghz - this has better range and may help.
If you're already using 2.4Ghz, then there's (likely) the underlying problem, and you may need to consider relocating some kit.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 31-10-2020 17:11
OK thanks
Can you explain a bit more please? It is on the 5GHz. How do I change it down to 2.4GHz?
Thanks
on 31-10-2020 18:08
Hi sootybutty,
You will be best making changes in your router first and then search for the wireless channels again on your V^.
Open a browser and in the address bar log into your hub 192.168.0.1 - then navigate to the following settings so you can differentiate between the signals.
Advanced Settings > Wireless Signal > click on Disable Channel Optimization then scroll down and click on Apply Changes.
Now go to Advanced Settings > Wireless > Security > Add a 2 to the end of the 2.4GHz Channel name, then further down add a 5 to the 5 GHz Channel name and click on Apply Changes.
You can leave the passwords the same as they are. Then log out of the hub at the top of the page
You will need to reconnect all you Wi-Fi devices some will want to connect to 5Ghz and some to 2.4GHz and some will connect to either.
You could also do a search for an app such as wifi analyzer which tells you the strength of the channel you are connected on, and also shows other channels so you can decide if you want to change the channel number on your hub
Advanced Settings > Wireless > Wireless Signal > beneath both the 5Ghz and 2.4GHz sections click on the manual button, and in the drop down box click on the channel number you want to change it to, then scroll down and click on Apply Changes
on 31-10-2020 18:13
Are you using your Superhub by itself, or in modem mode with your own router?
The SH, I believe, broadcasts both bands by default and the only issue is selecting 2.4Ghz on your V6. It's been a while since I used my V6 over WiFi so can check the menu paths later if necessary.
If you're using your own router, newapollo's advice is as good as anything.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 01-11-2020 14:42
Thanks Dave
That seems really complicated so I'll have a look but might wait to hear from Virgin re the complaint I sent them.
You mean just open a browser on my laptop?
If I get no help from Virgin I'll have a try at what you've said.
Thanks again
Karen
on 01-11-2020 14:51
Do you have your own router linked to your Virgin hub? Or are you using the VM Superhub by itself? I suspect the latter, but if you can confirm 😉
If you're only using the Superhub, then it may well (perhaps not older versions - others will be more familiar here) be using 5Ghz already and the only issue will be connecting your V6 to it.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 01-11-2020 14:53
Hi again sootybutty,
It sounds harder than it actually is. These pictures may be easier to follow. Just type in 192.168.0.1 in the address bar of your browser and log in with the SSID and settings password (8 numbers) shown on the base of your router
You don't need to do this bit, but it does help give a stronger signal without other networks interferring.