on 25-01-2023 11:32
Good morning,
I have received the controllers today for me to upgrade to Virgin 360 and tried to upgrade but after a while it encountered a problem and is displaying error MA1/4/40 and to please come back and try again later. I have since tried tried again later and still getting the same message. Can anyone please help advise me on this issue?
on 25-01-2023 12:12
Hi @rachielu33
Error MA1/4/40 is often due to a migration issue.
A few other people with this error have managed to perform the update by either removing the box from the mains for five minues and trying again, or by deleting recordings to make more space and then trying again.
You could also try turning off the V6 at switch; then on the V6 box hold down both the power button and the + button at the same time.
Then turn on the V6 again whilst keeping hold of those buttons for a further 30 seconds.
The box should reboot, the power button will turn blue, and fingers crossed it will reset and boot up normally, and then hopefully install the 360 software update.
If that doesn't work it's probably a settings issue at the VM end. The software upgrade has been started but the billing system doesn’t know which account to tie your equipment to activate the box.
The Faults team may be able to fix this, if not they will escalate it to 2nd level support to fix it over the phone by sending a new update signal.
If that also fails it will need an engineer visit to change the box
on 27-01-2023 13:46
Hi there @rachielu33
Thank you so much for your post and welcome back to the forums, it's great to have you here.
I am so sorry to hear that you have faced these issues with your new update and a big thank you to newapollo for their help and advise so far.
Have you been able to try what was recommended? How are things looking now?
on 27-01-2023 14:48
on 27-01-2023 14:54
Hi again @Geoblackpool
I suggested doing that on Wednesday, but pleased you've had a tech come out and perform the update.
if you do have any further issues just shout on the forums and we'll do our best to help.
In the meantime <<< this page >>> may be handy in getting used to the 360
on 27-01-2023 15:16
Hi, sorry been busy a bit. I tried all of that but to no avail. I rang Virgin media itself the same day and they did something their end which also didn't work so it's now been passed on to the 2nd level support there and have to wait for up to 5 working days so at the minute I'm at a standstill. I will let you all know what happens from that.
on 29-01-2023 17:56
Hi @rachielu33
Thanks for your response
Please do keep us updated with how you get on and we'll investigate further if needs be
on 02-02-2023 22:16
Good evening,
It has now been just over 5 working days (Wednesday last week) since I contacted Virgin Media by phone and it was passed on to 2nd level support (or whatever it is called) and no contact from them and still can't upgrade unfortunately.
on 05-02-2023 09:18
Hi @rachielu33
I have taken a look at things from our side and this should now be resolved for you.
If its not, please reboot the set top box and let us know if the set up is then complete.
Please pop back to us when you can.
Vikki - Forum Team
New around here? To find out more about the Community check out our Getting Started guide
on 05-02-2023 11:54
Good morning,
We finally managed last night to get it to upgrade so we now have the 360 up and running. Just now to get used to how this one works.