Ethernet cable

[Berman68]

Hi there, we want to run both our TVs which are on the new 360 via ethernet cable, However because of our setup we do not have enough ports on the Hub. We did purchase an ethernet splitter but strangely it didn't work. Has anyone out there managed to achieve this. I've talked to VM but they were no help. Suggestions please 

[dannylau · Accepted solution]

https://www.amazon.co.uk/NETGEAR-5-Port-Gigabit-Ethernet-Managed/dp/B07QF51CVQ/ref=mp_s_a_1_3?dchild...

[Berman68]

Hi all. I'm not very familiar with how to use this blog. Anyway I saw lots of questions regarding no sound on 360. Well we had the same problem until the HDMI RESOLUTION WAS set to 720. The engineer did ours and alls ok now. I hope this is helpful 

[Robert_P]

Hi Berman68

Thank you for taking the time to post your experiences with the audio on TV 360 and how this was resolved for yourself. We appreciate the update and welcome to the community.

If you need us again in the future, please don't hesitate to get in touch 🙂

Rob