on 16-06-2021 18:22
Just upgraded to 360 and have boxes in lounge and master bedroom. Repeatedly seeing “box offline” when trying to watch saved programmes. It’s really annoying. How can this be rectified?
on 16-06-2021 18:40
If you are trying to watch recordings on the mini box you will have problems if the main box is either turned off or set up on Eco Start
Go to Settings > System > Standby power consumption. You have 3 choices.
Fast start - the 360 starts quickly but is less energy efficient
Active start - more energy efficient than fast start but the box takes a little longer to start up
Eco start - the most energy efficient and probably the one you're using. It uses minimal power but takes a while to start.
The first two options are best if you have a mini box and want to watch a recording on it
on 16-06-2021 18:54
How about the other way around. Watched a programme on the secondary box and now can’t continue watching on the primary box. Same thing with the settings?
on 16-06-2021 19:08
Assuming that you have a 360 and a 360 mini, the secondary (mini box) doesn't have a hard drive. All the recordings are made on the main 360 box.
If that's the case then to resume watching on the main box you need to have pressed record on the mini box because the mini box will only pause for a few minutes.
Info below from https://www.virginmedia.com/help/virgin-tv-watch-recordings-on-another-tv-box#360
Watch a recorded show, or pause live TV to watch on another box
Get yourself comfy, grab the remote and follow these steps.
1. Press My Shows
2. Scroll down to the end and you’ll see the name(s) of Virgin TV boxes you have connected
3. Select the Virgin TV box you want to watch from and press OK
4. Choose the show you want to watch and press OK
The following page has a lot of useful tips for the 360/help/virgin-tv-360
on 16-06-2021 19:57
Hi again Dave. No, the system is using the existing V6 boxes.
on 16-06-2021 20:00
@clair_uk wrote:Hi again Dave. No, the system is using the existing V6 boxes.
So to confirm you've migrated V6 boxes > multiple 360?
Can all the boxes use OnDemand services ok? It's something else to check, as it's the same box<--->hub connection being used.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 16-06-2021 20:03
Go to Settings > Network > Diagnostics you can view the connection status.
on 16-06-2021 23:52
Hi Claire,
As it's the software that really controls all of this it shouldn't make any difference if you have 2 upgraded V6 boxes or a 360 main box and a mini box except for the fact wih 2 V6 boxes you can record on both.
You do need to have both boxes set to fast start or active start so you can watch recordings from box 1 to box 2, and visa versa, the instructions newapollo posted for continue watching should work, for recordings to continue watching across boxes I wouldn't have thought there would be any problem if you pressed the back button to stop on 1 box it should then appear in your continue watching list.
Roy