on 23-11-2020 16:13
Hi Folks, my old hub router failed last week, Now replaced with HUB 3.0, everything good but..........
I use a Vbox communications TV gateway box which is fed from my sat dish. I then use KODI as a front end to view live tv, I am all OSX.
KODI uses an add on called "Vbox gateway pvr client" but every time I launch KODI I get a message saying "add on couldn't be loaded".
I think the HUB 3.0 is blocking KODI getting the add on.
Any suggestions greatly appreciated
on 23-11-2020 16:32
on 23-11-2020 16:37
Thanks for that, but I have checked that the IP address is correct.
on 23-11-2020 17:22
on 23-11-2020 20:55
@thesalydog wrote:Thanks for that, but I have checked that the IP address is correct.
Reviewing the below site I'm wondering if you setup some port forwarding rules and a static IP, which would have been lost with the HUB swap:
on 23-11-2020 21:06
Many thanks, after a lot of head scratching, problem solved.
on 23-11-2020 21:17
@thesalydog wrote:Many thanks, after a lot of head scratching, problem solved.
What was it out of interest?
on 23-11-2020 21:26
It was the incorrect IP address , eventually I opened up the router and kept an eye on the number of connected devices, I then disconnected the power and ethernet connection from Vbox and reconnected, and another device popped up.
Then by a matter of elimination I worked out what the new IP address was and when I entered that into the add on in KODI hey bingo everything came good.
on 24-11-2020 07:35