Menu
Reply
kierangerardmal
  • 2
  • 0
  • 0
Joining in
911 Views
Message 1 of 4
Flag for a moderator

Hub3 setup

Got a wire coming in from outside then a splitter and 2 wires coming out from the splitter

0 Kudos
Reply
Roger_Gooner
  • 7.9K
  • 518
  • 1.49K
Alessandro Volta
888 Views
Message 2 of 4
Flag for a moderator

Re: Hub3 setup

One cable connects to the hub, power it one, there will be a connection to the network, some updates will be done and it will work. If you have TV connect the other cable (via the IEC connector) to the TV box and connect the box to the hub with an Ethernet cable. That's pretty much most people have to do unless there is a fault.

--
Hub 3.0, TP-Link Archer C8, TP-Link TL-SG108S 8-port gigabit switch, V6
My Broadband Ping - Roger's VM Broadband Connection
kierangerardmal
  • 2
  • 0
  • 0
Joining in
886 Views
Message 3 of 4
Flag for a moderator

Re: Hub3 setup

Thanks scrapped the paint of the splitter and noticed one was tv I just plugged new wire in other one and it's working OK thanks 

0 Kudos
Reply
jem101
  • 3.72K
  • 379
  • 1.53K
Community elder
862 Views
Message 4 of 4
Flag for a moderator

Re: Hub3 setup

Sorry, but that the heck just happened here?

0 Kudos
Reply