Menu
Reply
  • 6
  • 0
  • 0
Melanier
Joining in
406 Views
Message 1 of 10
Flag for a moderator

Vivid 200

I am on vivid 200 and have not had anything like that speed.

i have just used speed test and I am getting 35.93 download and 12.44 upload.

Any advice

0 Kudos
Reply
  • 36
  • 1
  • 4
starsky135
On our wavelength
402 Views
Message 2 of 10
Flag for a moderator

Re: Vivid 200

Are you using Wi-Fi or an Ethernet cable?
0 Kudos
Reply
  • 6
  • 0
  • 0
Melanier
Joining in
398 Views
Message 3 of 10
Flag for a moderator

Re: Vivid 200

Wi fi

0 Kudos
Reply
  • 6
  • 0
  • 0
Melanier
Joining in
397 Views
Message 4 of 10
Flag for a moderator

Re: Vivid 200

Router Status
This page displays information on the status of the Hub 3.0 HFC and IP network connectivity.
Status
Downstream
Upstream
Configuration
Network log
Refresh data
Downstream bonded channels
Channel Frequency(Hz) Power
(dBmV) SNR
(dB) Modulation Channel ID
1 299000000 -1.9 38.6 256 qam 13
2 323000000 -1.4 40.3 256 qam 16
3 315000000 -1.5 40.3 256 qam 15
4 307000000 -1.7 40.3 256 qam 14
5 291000000 -2.2 38.9 256 qam 12
6 283000000 -2.4 40.3 256 qam 11
7 275000000 -2.5 38.9 256 qam 10
8 267000000 -2.7 38.9 256 qam 9
9 259000000 -2.7 40.3 256 qam 8
10 251000000 -2.9 38.9 256 qam 7
11 243000000 -3 40.3 256 qam 6
12 235000000 -2.9 40.3 256 qam 5
13 227000000 -2.7 40.3 256 qam 4
14 219000000 -2.9 40.3 256 qam 3
15 211000000 -3 40.3 256 qam 2
16 203000000 -3.2 40.3 256 qam 1

0 Kudos
Reply
  • 6
  • 0
  • 0
Melanier
Joining in
396 Views
Message 5 of 10
Flag for a moderator

Re: Vivid 200


Status
Downstream
Upstream
Configuration
Network log
Refresh data
Upstream bonded channels
Channel ID Frequency(Hz) Mode Power
(dBmV) Modulation Channel Bandwidth(Hz) Symbol Rate (ksps)
81 37600000 ATDMA 48.8 64 qam 6400000 5120
83 24400000 ATDMA 48.8

0 Kudos
Reply
  • 6
  • 0
  • 0
Melanier
Joining in
395 Views
Message 6 of 10
Flag for a moderator

Re: Vivid 200

Router Status
This page displays information on the status of the Hub 3.0 HFC and IP network connectivity.
Status
Downstream
Upstream
Configuration
Network log
Refresh data
Operational Configuration
General Configuration Value
Network access
Enabled
Maximum Number of CPEs
1
Baseline Privacy
Enabled
Docsis Mode
Docsis30
Config file
V0dea97109ea7aa00.cm
Primary Downstream Service Flow
SFID 52258
Max Traffic Rate 230000000
Primary Upstream Service Flow
SFID 52257
Max Traffic Rate 12700000

0 Kudos
Reply
  • 6
  • 0
  • 0
Melanier
Joining in
394 Views
Message 7 of 10
Flag for a moderator

Re: Vivid 200

Router Status
This page displays information on the status of the Hub 3.0 HFC and IP network connectivity.
Status
Downstream
Upstream
Configuration
Network log
Refresh data
Network Log
Date And Time Error Number Event Description
2017-08-06 22:42:35.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-07 09:18:47.00 82000200 No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-07 13:28:32.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-07 14:32:24.00 82000200 No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-07 15:56:10.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-07 18:23:53.00 68010400 DHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-08 04:10:31.00 82000200 No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-14 08:01:30.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-14 22:22:59.00 82000200 No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-14 23:46:30.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-15 15:31:33.00 68010400 DHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-15 20:56:57.00 82000200 No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-18 16:24:03.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-19 12:16:37.00 68010400 DHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-24 01:45:37.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-24 06:10:04.00 82000200 No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-24 16:41:24.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-25 02:13:34.00 82000200 No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-25 03:53:14.00 68010100 DHCP RENEW sent - No response for IPv4;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
2017-08-25 07:37:14.00 68010400 DHCP REBIND WARNING - Field invalid in response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;

0 Kudos
Reply
  • 25.23K
  • 1.05K
  • 4.03K
Superuser
Superuser
374 Views
Message 8 of 10
Flag for a moderator

Re: Vivid 200

you need to test the speed using a wired connection on a device that support a 1gbps network

  • 10.87K
  • 406
  • 1.24K
Forum Team (Retired) Nicola_C
Forum Team (Retired)
330 Views
Message 9 of 10
Flag for a moderator

Re: Vivid 200

Hello Melanier

 

Your connection is looking very good from here, area traffic nice and low. As apcyberax said it is always best to use an 1Gbps Ethernet connection to measure speed on www.speedtest.net as this will normally remain on our network.

 

Thank you

Nicola

Virgin Media Forum Team
0 Kudos
Reply
  • 13
  • 0
  • 0
melhowley
Joining in
205 Views
Message 10 of 10
Flag for a moderator

Re: Vivid 200

I had vivid 200 but upgraded to the newer 350 fibre ,was very disappointed with it as it didn't improve at all and as it was being run on the same rig settings being same I see no reason it shouldn't have .I reduced my package back down to 200 and since then I rarely get over 110 mb connection speed where before I was getting 212 constant .virgin came to fix it and only made it worse.roll on gfast  .

0 Kudos
Reply