on 05-03-2022 15:56
Recent upgrade to M350. Upload now faster (36Mbps) but download capped to previous speed under M100 (90Mbps). This is after resetting the modem (hub 3) and connecting by ethernet cable.
on 05-03-2022 16:26
on 05-03-2022 20:44
I'm Mac based. Hub 3 in modem mode > Airport Time Capsule router > ethernet cable to iMac, WiFi to MacBook Pro and iPhone. 91 down 36 up on both iMac and MBPro. (76 down 30 up on iPhone)
I don't think it is a cable issue. The speed graphs are so steady and hard capped.
on 05-03-2022 21:27
Hi, what speed are you getting when the hub is in router mode with airport disconnected? When in router mode log into hub settings > Advanced > Wireless > Wireless signal. Make sure on 5GHz that 20/40/80 is enabled. If not Disable channel optimization and select 20/40/80 and apply settings, your Wi-Fi will drop out for a bit, when its reconnected enable Channel optimization and apply settings. Then log out using the logout option Top right of screen
on 08-03-2022 08:36
Good morning @mikesw14,
Welcome to the forums and thank you for taking the time to post.
I am sorry to hear that you have been having some issues with your speeds.
Could you advise on the questions asked above? This will help us gain an understanding of if its an issues with your router or the speeds we are providing.
Kind regards,
Zak_M
on 23-11-2022 14:53
(I'm back trying to solve this...)
I removed the Apple router and switched the Hub 3 to WiFi and managed 150Mbps down. I have now got a new router (ASUS RT-AX92U) and added that to the hub after switching back to Modem mode. The speed test now is still the same as before, i.e. approaches but never exceeds 100Mbps whether using the new router WiFi or ethernet connection.
on 23-11-2022 16:10
Perhaps try a speed test with : https://www.samknows.com/realspeed/
the results will show :
1) the speed to the Virgin Media Hub (should reflect M350)
2) the speed achieved by the end device
on 23-11-2022 16:20
on 23-11-2022 16:47
Thanks for the pointer to SamKnows. I have signed up and will wait to see if I can get a white box.
Thanks
on 23-11-2022 17:28
A white box is not needed, the VM Hub3/4/5 should be sufficient to run a Samknows Realspeed test.
Below on the right is PC connected via 2.4Ghz WiFi just to show what happens where speed is lost after the Hub3 on M125 service.