on 04-01-2022 18:51
Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
1 | 39400000 | 35.270599 | 5120 KSym/sec | 16QAM | 4 |
2 | 46200000 | 34.770599 | 5120 KSym/sec | 32QAM | 3 |
3 | 53700000 | 35.020599 | 5120 KSym/sec | 64QAM | 2 |
4 | 60300000 | 35.020599 | 5120 KSym/sec | 32QAM | 1 |
Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
1 | US_TYPE_STDMA | 0 | 0 | 121 | 0 |
2 | US_TYPE_STDMA | 0 | 0 | 61 | 0 |
3 | US_TYPE_STDMA | 0 | 0 | 10 | 0 |
4 | US_TYPE_STDMA | 0 | 0 | 2 | 0 |
on 04-01-2022 23:54
The upstreamn power levels should all be 64QAM.
That's a lot of T3 timeout errors.
When was the last time you rebooted your hub?
Have you looked at Check service status at the top of the page?
If nothing is showing you could also try the Service Status number 0800 561 0061. This often gives details of more local issues down to postcode level.
You should post your full router stats here for the learned members to check what the problem is and offer assistance.
In your browser’s URL box type in http://192.168.0.1 (or http://192.168.100.1 - if in modem mode) and hit return.
Don't login, instead below there click on Check Router Status
From the Router Status” page copy/paste 3 FULL sets of data onto here – from the Downstream, Upstream, & Network Logs pages.
You could also set up a BQM monitor at thinkbroadband.com - this will give you an insight into what is happening with the signal at the other side of the Hub, it will take a few hours to get any kind of trend showing although you can post the link straight away.
Instructions for posting BQM Link
Under your BQM graph are two links in red.
Click the lower link (Share Live Graph) then click generate.
Copy the text in the Direct Link box, beware, there may be more text than you can see.
On here click the Link icon (2 links chain to the left of the camera icon)
In the URL box paste the link you copied and then click OK.
on 07-01-2022 15:57
Hi @Taylorplatt45 thanks for posting and welcome back to our community.
Sorry to hear of your slow upload speeds. I would like to take a closer look on your behalf. I am going to send you a private message.
Regards
Lee_R
on 08-01-2022 09:39
Hi @Taylorplatt45 thanks for confirming your details to me.
I am sorry, there is an issue impacting your locality that would explain the issue you're having. The current estimated fix time for this is 14th January 2022 at 9:00am.
Regards
Lee_R