on 23-08-2021 00:01
When I had 360 installed, the engineer fitted an attenuator to my Hub 3. A couple of weeks ago I upgraded to Gig1 and a Hub 4. On a wired connection I am not achieving the expected speed as per the VM table although well within minimum expected speed spec. Wi-Fi performance is improved as hoped (once the three pods I have got their collective stuff together) and although the wired speed is at around 950Mbps download I have not achieved expected speed since upgrading. Would removing the attenuator be advised or help boos the speed to that magical 1Gb? Thanks
Answered! Go to Answer
on 23-08-2021 16:06
on 23-08-2021 00:58
on 23-08-2021 16:06
on 23-08-2021 16:20
@Superphot wrote:the wired speed is at around 950Mbps download I have not achieved expected speed since upgrading.
The maximum achievable speed is 940mb via Ethernet connection as this is all the Gigabyte ports will allow from the hub, so you're doing well getting 950mb 🙂
Virgin advertise a product that's 1gb but in reality its lower than that coming out the other side of the hub. If you run a test on https://www.samknows.com/realspeed/ you will see 1gb coming into the Hub 4.