Menu
Reply
  • 299
  • 4
  • 13
GazCBG
Superfast
343 Views
Message 1 of 5
Flag for a moderator

Can someone check my powerlevels please

Can someone check my power levels please, they are below

Upstream
Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
1 25799983 4.075 5120 16 qam 8
2 32599996 4.225 5120 16 qam 7
3 39400036 4.325 5120 64 qam 6
4 46200014 4.325 5120 64 qam 5

Downstream
Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
1 299000000 0.2 38 256 qam 21
2 139000000 1.2 38 256 qam 1
3 147000000 1.5 38 256 qam 2
4 155000000 0.5 37 256 qam 3
5 163000000 -3 37 256 qam 4
6 171000000 0.4 37 256 qam 5
7 179000000 1.4 38 256 qam 6
8 187000000 1.5 38 256 qam 7
9 195000000 1.4 38 256 qam 8
10 203000000 0.7 38 256 qam 9
11 211000000 0.2 38 256 qam 10
12 219000000 -0.4 38 256 qam 11
13 227000000 0 38 256 qam 12
14 235000000 0 38 256 qam 13
15 243000000 0 38 256 qam 14
16 251000000 0 38 256 qam 15
17 259000000 -0.5 37 256 qam 16
18 267000000 0.2 38 256 qam 17
19 275000000 0.2 38 256 qam 18
20 283000000 0.2 38 256 qam 19
21 291000000 0.2 38 256 qam 20
22 307000000 -1.5 37 256 qam 22
23 315000000 0 37 256 qam 23
24 323000000 0 37 256 qam 24

_____________________

_____________________
Regards
Gaz
0 Kudos
Reply
  • 3.68K
  • 52
  • 832
CarlTSpeak
Wise owl
334 Views
Message 2 of 5
Flag for a moderator

Re: Can someone check my powerlevels please

They're okay but there are signs of upstream noise.

If it becomes an 'issue' VM's network assurance team will deal with it.

0 Kudos
Reply
  • 299
  • 4
  • 13
GazCBG
Superfast
297 Views
Message 3 of 5
Flag for a moderator

Re: Can someone check my powerlevels please

Are the upstream to low as the dot is after the first number?
From what I remember it use to be xx.xx

Firmware version: .608

Upstream is 4.075 to 4.325

_____________________

_____________________
Regards
Gaz
0 Kudos
Reply
  • 13.08K
  • 1K
  • 3.03K
Very Insightful Person
Very Insightful Person
283 Views
Message 4 of 5
Flag for a moderator

Re: Can someone check my powerlevels please

upstream is fine - theres a bug in the firmware so x10 is the correct reading

____________________

Tony
0 Kudos
Reply
  • 299
  • 4
  • 13
GazCBG
Superfast
280 Views
Message 5 of 5
Flag for a moderator

Re: Can someone check my powerlevels please

Thanks for the replies.

Appears there is a issue in the area at the moment, and meant to be fixed by 4pm

_____________________

_____________________
Regards
Gaz
0 Kudos
Reply