on 04-12-2021 18:10
I've had a Superhub 2 on M200 for some time and it's generally worked fine, with Wi-fi around the house OK. I use my SH2 as a router rather than in modem mode.
With Volt, I opted to be increased to M350 (only increased as it was offered but don't really need the extra speed) which has now been activated but I'm not getting that speed. No information from VM about this but having read on here I can see that the maximum speed on the SH2 is M200.
I've read a bit about people not liking the SH3. So my question is do I stick with my SH2 and its maximum M200, or ask for a SH3 to get M350? If I stick with my SH2, should I tell VM that I want to go back down to M200? I don't particularly want to pay out for a separate router if I don't need one.
on 04-12-2021 18:14
on 04-12-2021 18:20
on 04-12-2021 18:26
To reboot, do you mean just to turn it off and on again - as if so that doesn't make a difference. Or do I need to do something else?
on 04-12-2021 19:05
04-12-2021 19:10 - edited 04-12-2021 19:11
You need a Hub 3 for 350. If you want to stay with the SH2 you will need to stay on 200.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 04-12-2021 19:35
Thanks - but I'm asking for an opinion of whether to stick with my SH2, or whether it's better to go to SH3, bearing in mind I'm using it in router mode. I connect my desktop computer via ethernet, but have several Wifi devices.
Therefore, am I better sticking to my SH2 at M200 or should I go to SH3 at M350? I appreciate there's a speed increase but if the SH3 is going to be less reliable or I'm not going to get as good WiFi for instance I'll stick with my SH2. Hopefully, someone with experience of both can advise.
on 04-12-2021 21:00