on 09-05-2022 19:38
Been away for a few days on return 360 box has red light and no signal on tv screen.Have unplugged all power and HDMI leads still no joy.light is orange for a few seconds then goes red.
Answered! Go to Answer
on 12-05-2022 09:36
Hello @dave-e1,
Welcome, thanks for posting.
I am sorry for the issue with your Hub.
Can you please do the following:
Turn the power switch off on the back of the Hub.
Ensure the Hub is upright, in a well-ventilated location and out of direct sunlight, if possible
Switch the hub back on at the power. The Hub should now operate normally.
If the Hub does not boot up or boots back up let me know.
Many thanks,
New around here? To find out more about the Community check out our Getting Started guide
on 12-05-2022 09:36
Hello @dave-e1,
Welcome, thanks for posting.
I am sorry for the issue with your Hub.
Can you please do the following:
Turn the power switch off on the back of the Hub.
Ensure the Hub is upright, in a well-ventilated location and out of direct sunlight, if possible
Switch the hub back on at the power. The Hub should now operate normally.
If the Hub does not boot up or boots back up let me know.
Many thanks,
New around here? To find out more about the Community check out our Getting Started guide
on 12-05-2022 09:52
Hi thanks for reply,I have now sorted it as I said could not get box out of standbys mode. Eventually I disconnected the hub completely left it over night and when reconnected next morning all was fine. Message on some recordings said not recorded due to power cut. But all sorted now thanks.
on 14-05-2022 10:54
Hi Dave-e1, thank you for coming back to the thread to update us!
If you ever have TV issues you can run the troubleshooting steps here to eliminate or isolate the root cause: https://virg.in/fixyourtv.
Glad to hear this has now been sorted - please do let us know if the issue returns so we can offer further support.
Wishing you all the best!